Kingston Technology Corp.
Kingston Technology Corp. KCP556US8-16 16GB DDR5 5600MT/s CL46 1.10V 288-pin desktop RAM
A 16 GB DDR5 desktop module running at 5600 MT/s with CL46 latency and 1.10 V operation
- Capacity16GB
- Type288-Pin DDR5 SDRAM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCNo
- 16 GB capacity for multitasking headroom
- 5600 MT/s speed for responsive data transfer
- CL46 latency for predictable timing
- 10 V operation for efficient power draw
- 288-pin DDR5 form factor for desktop compatibility
16GB DDR5 5600MT/s Module
This 16GB DDR5 module runs at 5600MT/s with CL46 latency and 1.10V operation. It uses a 288-pin DIMM form factor and a single-rank 1Rx8 layout. The non-ECC unbuffered design suits standard desktop builds.
DDR5 Platform Limits
DDR5 memory requires a motherboard and CPU that both support the DDR5 standard and 288-pin DIMM slots. The module operates at the JEDEC 5600MT/s speed with CL46 timing at 1.10V. Maximum capacity and speed depend on the platform memory controller.
Pre-Installation Checks
Verify your motherboard accepts 288-pin DDR5 DIMMs and supports 5600MT/s at 1.10V. Confirm the board can run non-ECC unbuffered modules in single-rank configuration. Check BIOS version for DDR5 compatibility and ensure free DIMM slots are available.
Privalumai
- 16 GB capacity for multitasking headroom
- 5600 MT/s speed for responsive data transfer
- CL46 latency for predictable timing
- 10 V operation for efficient power draw
- 288-pin DDR5 form factor for desktop compatibility
Specifikacijos
| Brand | Kingston |
|---|---|
| Model | KCP556US8-16 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 SDRAM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Siuntos svoris | 0.05 kg |
| Pakuotės dydis | 161 × 47 × 8 mm |
Klausimai apie šią prekę
Is the 16GB DDR5 5600MT/s module the right capacity for my build?
This single module provides 16GB of DDR5 memory at 5600MT/s. It fits a 288-pin DDR5 slot and runs at 1.10V with CL46 latency, making it a straightforward upgrade for desktops that support DDR5.
What does the 5600MT/s rating deliver in actual use?
The 5600MT/s speed (PC5-44800) sets the maximum data rate the module can sustain. Real-world throughput depends on the memory controller and BIOS, but the module is rated for this transfer rate at CL46 and 1.10V.
How does the 288-pin DDR5 interface limit performance?
The 288-pin DDR5 DIMM interface carries the 5600MT/s signal at 1.10V. The module is unbuffered, non-ECC, single-rank (1Rx8), so the interface caps at the JEDEC standard rate without registered or ECC overhead.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



