Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four black DDR5 RDIMM modules with low-profile heat spreaders

Kingston Technology Corp.

Kingston Technology Corp. KF564R32RBK4-64 64GB (4x16GB) DDR5-6400 CL32 ECC Registered server RAM

SKU CH-XE7A-C62J1 MPN KF564R32RBK4-64

A 64 GB quad-channel kit of four 16 GB DDR5-6400 CL32 ECC registered DIMMs for server and workstation platforms

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL32
  • Timing32-39-39
  • Voltage1.40V

Capacity 64GB (4 x 16GB)

Speed DDR5 6400 (PC5 51200)

Rank 1Rx8

  • 64 GB quad-channel kit gives ample capacity for demanding workloads
  • DDR5-6400 CL32 delivers high throughput with low latency
  • Registered ECC modules protect data integrity in critical applications
  • Intel XMP 3.0 profiles enable automatic overclocking for peak performance
  • 40 V operation balances speed and power efficiency

64GB DDR5-6400 Registered ECC Kit

This Kingston FURY Renegade Pro kit delivers 64GB of DDR5-6400 memory across four 16GB Registered DIMMs. It targets creators, engineering professionals, and data scientists using next-generation Intel or AMD workstation and high-end desktop platforms that require DDR5 RDIMMs with ECC for data integrity.

Upgrading from standard JEDEC DDR5 RDIMMs

The kit operates at 6400 MHz with CL32-39-39 timings at 1.40V, enabled by Intel XMP 3.0 profiles. The jump is worthwhile when your workload benefits from higher bandwidth and lower latency than standard server memory provides, while retaining Registered ECC error correction for multi-bit error detection.

Installing four 288-pin RDIMMs

Modules install into standard 288-pin DDR5 RDIMM slots on compatible workstation or high-end desktop motherboards. Ensure the platform supports Registered ECC DDR5 and XMP 3.0 to activate the rated speed; otherwise the kit will fall back to standard JEDEC speeds. Builders needing non-registered UDIMMs or capacities beyond 64GB should look elsewhere.

Privalumai

  • 64 GB quad-channel kit gives ample capacity for demanding workloads
  • DDR5-6400 CL32 delivers high throughput with low latency
  • Registered ECC modules protect data integrity in critical applications
  • Intel XMP 3.0 profiles enable automatic overclocking for peak performance
  • 40 V operation balances speed and power efficiency

Specifikacijos

BrandKingston
SeriesFury Renegade Pro
ModelKF564R32RBK4-64
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL32
Timing32-39-39
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitQuad Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
Heat SpreaderYes
FeaturesKingston FURY KF564R32RBK4-64 is a kit of four 2G x 80-bit (16GB) DDR5-6400 CL32 SDRAM (Synchronous DRAM) 1Rx8, ECC memory module, based on ten 2G x 8-bit FBGA components per module. The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 64GB. Each module has been tested to run at DDR5-6400 at a low latency timing of 32-39-39 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V.
Siuntos svoris0.11 kg
Pakuotės dydis168 × 104 × 38 mm

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will these 288-pin DDR5 RDIMMs fit my server board slots?

Each module is a standard 288-pin DDR5 RDIMM, so it fits any motherboard slot wired for DDR5 registered memory.

How do I enable the rated 6400 MHz speed with Intel XMP 3.0 on a workstation board?

Enter the BIOS, select the XMP 3.0 profile for this kit, save and reboot; the board will set 6400 MT/s, CL32-39-39 timings and 1.40 V automatically.

What ongoing care does the heat spreader on these 1Rx8 modules need?

Keep chassis airflow directed across the spreaders; dust them with compressed air during routine server cleaning to maintain thermal performance.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.