Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

Kingston Technology Corp.

Kingston Technology Corp. Value RAM 8GB 1333MHz DDR3L ECC Registered DIMM 1.35V

SKU CH-C5TH-1HP4N

8GB DDR3L ECC registered DIMM running at 1333MHz with 1.35V operation and CL9 timing

  • ECC protection catches data errors
  • Registered design stabilises heavy workloads
  • 1333 MHz DDR3 speed handles everyday tasks
  • 35 V DDR3L voltage reduces power draw
  • 240-pin DIMM fits standard desktop slots

Value RAM 8GB DDR3L Registered DIMM

This single 8 GB DDR3L module runs at 1333 MHz with CL9 latency and a 1.35 V operating voltage. It uses a 240-pin registered ECC design built with DR x8 chips and includes thermal sensing. The stick is 100-percent tested to meet industry-standard specifications for desktop systems.

Suits servers and workstations needing registered

Builders who need unbuffered non-ECC modules for standard consumer motherboards should look elsewhere. Systems that cannot accept registered DIMMs or that require higher speeds than 1333 MHz will not be compatible with this unit.

Straightforward installation in a 240-pin DDR3 slot

Align the notch, press firmly until the latches click, and ensure the platform supports registered ECC at 1.35 V. The most common issue is installing the module in a board that only accepts unbuffered memory, which prevents the system from posting.

Privalumai

  • ECC protection catches data errors
  • Registered design stabilises heavy workloads
  • 1333 MHz DDR3 speed handles everyday tasks
  • 35 V DDR3L voltage reduces power draw
  • 240-pin DIMM fits standard desktop slots

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Does my motherboard need a 240-pin DDR3 slot that supports 1.35 V registered ECC modules for this 8 GB stick to work?

Yes, the module is a 240-pin DDR3L registered ECC DIMM that runs at 1.35 V, so the board must accept that voltage and registered ECC memory.

Can I add this 1333 MHz CL9 registered ECC module to a system that already has unbuffered non-ECC DDR3 memory installed?

No, registered ECC memory cannot be mixed with unbuffered non-ECC modules; the motherboard must support registered ECC for all populated slots.

After installation, how can I confirm the module is running at 1333 MHz with CL9 timings and ECC active?

Check the BIOS memory information or a system utility such as CPU-Z; it should report 1333 MHz, CL9 latency and show ECC enabled for the 8 GB module.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.