Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Lian Li Strimer Wireless 16-pin GPU RGB extension cable, 370mm, 12 light guides, black finish

Lian Li

Lian Li Strimer Wireless 16-Pin GPU RGB Power Extension Cable 370mm 12 Light Guides

SKU CH-NVXK-0TXPA

A 12-light-guide 12+4-pin GPU power extension cable with 2.4 GHz wireless ARGB control, 370 mm long, controller sold separately

Option 12+4 pin to 12+4 pin , 12 light guides

  • 12+4 pin to 12+4 pin , 12 light guides
  • 12+4 pin to 12+4 pin , 8 light guides
  • 24 pin without controller
  • 24 pin with controller
  • GPU 2x8-PIN

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • Wireless 2.4 GHz control cuts cable clutter
  • 12 light guides give vivid ARGB coverage
  • 370 mm length fits large GPU builds
  • 16-pin 12+4 connector matches modern graphics cards
  • Controller sold separately for flexible setup

Cable purpose and audience

The Lian Li Strimer Wireless is a 12+4-pin female to male ARGB GPU power extension cable with twelve integrated light guides. It targets builders who want addressable RGB illumination on their 16-pin graphics power connection without extra USB wiring.

Upgrade path and wireless benefit

The 2.4 GHz wireless control system removes the need for a separate USB 2.0 header and its associated cable, simplifying installation compared with earlier wired Strimer kits. The jump is worthwhile when motherboard headers are scarce or when a cleaner cable run is the priority.

Capacity and headroom

At 370 mm (14.56 in) the cable reaches most full-size GPU mounting positions while the twelve light guides cover the visible length of the extension. A separate RF-T-B controller is mandatory for operation; without it the lighting cannot be addressed.

Privalumai

  • Wireless 2.4 GHz control cuts cable clutter
  • 12 light guides give vivid ARGB coverage
  • 370 mm length fits large GPU builds
  • 16-pin 12+4 connector matches modern graphics cards
  • Controller sold separately for flexible setup

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Kiti šio modelio variantai

Dar 1 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What clearance does the 370 mm Strimer Wireless extension with its 12 light guides need inside the case?

The cable is 370 mm (14.56 in) long and has 12 light guides that add thickness, so allow extra space behind the GPU for the bend radius and the wider illuminated section.

How do I connect the 16-pin Strimer Wireless to the 2.4 GHz controller, and what step is often missed?

Plug the 12+4-pin female end into the GPU, the male end into the PSU cable, then pair the extension with the separate RF-T-B controller via 2.4 GHz; the common miss is forgetting to buy and connect that controller first.

When will the light guides or wireless module on this 12+4-pin extension need replacement?

The addressable RGB light guides are rated for long-term use; replace them if LEDs fade, colours shift, or the 2.4 GHz wireless link becomes unreliable after extended operation.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.