Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Grey square thermal pad 120 by 120 by 2.5 millimetres weighing 150 grams

Lirealar

Lirealar 120x120mm thermal paste 12.8 W/mK 150g 2.5mm

SKU CH-T338-FF88X MPN 120x120mm

A 120 × 120 mm silicone thermal pad rated at 12.8 W/mK and 2.5 mm thick, non-conductive and reusable for CPU, GPU or LED coolers

  • Volume / Net Weight150g
  • Thermal Conductivity12.8 W/mK,
  • Long Term Operating Temperature-40 C to +400C
  • SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/c
  • FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi

Type Thermal Pad

Model 120x120mm

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

Specification 2.5mm

Rodyti 1 daugiau konfigūracijų
  • 8 W/mK thermal conductivity transfers heat efficiently from CPU or GPU to heatsink
  • Non-conductive insulation prevents electrical shorts across sensitive components
  • Soft 30–55 Shore C hardness conforms to uneven surfaces and fills air gaps
  • Operates reliably from –40 °C to 200 °C for long-term stability
  • 120 × 120 × 2.5 mm pad weighs 150 g and covers large contact areas

Gap-Filling Thermal Pad

The Lirealar 120x120mm thermal pad delivers 12.8 W/mK conductivity in a 2.5mm thick sheet. Grey silicone material compresses to bridge uneven surfaces between heat sources and heatsinks. Non-conductive insulation prevents electrical shorts across CPU, GPU or LED cooler components. Supplied as a single 150g pad sized 120x120mm.

Builders Needing High-Conductivity Gap Filler

Suits desktop and laptop repairs where a 2.5mm thickness matches the component stack height. Buyers who need a thinner or thicker interface layer should look at alternative pad heights. Not for applications requiring liquid metal or phase-change compounds instead of a solid silicone sheet.

Simple Press-Fit Installation

Natural viscosity holds the pad in place during assembly without adhesive. Cut to shape if the target die is smaller than 120mm. Avoid stretching the material; over-compression beyond the 30-55 Shore C range reduces long-term performance. Reusable if removed carefully without tearing.

Privalumai

  • 8 W/mK thermal conductivity transfers heat efficiently from CPU or GPU to heatsink
  • Non-conductive insulation prevents electrical shorts across sensitive components
  • Soft 30–55 Shore C hardness conforms to uneven surfaces and fills air gaps
  • Operates reliably from –40 °C to 200 °C for long-term stability
  • 120 × 120 × 2.5 mm pad weighs 150 g and covers large contact areas

Specifikacijos

SeriesThermal Pad
Model120x120x2.5mm
Volume / Net Weight150g
Thermal Conductivity12.8 W/mK,
Long Term Operating Temperature-40 C to +400C
SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/cc Hardness:30-55(Sc) Breakdown Voltage:>9.8KV(1mm) Temperature Range:-40°C~200°C
FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi One Pad , multi-purpose, durable,insulated, non-conductive lnsulation does not conduct electricity and is safe for use Natural viscosity, easy to assemble and reusable

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What minimum heatsink surface is required for the 120x120mm pad to cover the CPU or GPU die?

The pad measures 120 by 120 millimetres and is 2.5 millimetres thick, so the heatsink contact area must be at least that large to avoid overhang.

Will the 12.8 W/mK pad work if I reuse my existing cooler that has uneven mounting pressure?

Yes, the pad compresses between 30 and 55 Shore C and its natural viscosity fills gaps on uneven surfaces, compensating for irregular pressure across older coolers.

How can I verify the pad is seated correctly after installation?

After mounting, check that the pad has spread evenly without air pockets, that temperatures drop under load within the -40 to 200 Celsius operating range, and that no electrical shorts occur thanks to the >9.8 kV breakdown voltage.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.