Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green PCB with white 40-pin header and sixteen black servo connectors along the edges

LORDWORLD

LORDWORLD 16-Channel Servo Driver Module for Raspberry Pi Pico

SKU CH-0XGJ-Z3E6X

A 16-channel servo driver board for Raspberry Pi Pico with 16-bit PWM resolution, an integrated 5V 3A regulator for battery power, and exposed Pico pins for expansion

  • Drives up to 16 servos with precise 16-bit PWM control
  • Powers servos from batteries via integrated 5 V, 3 A regulator
  • Compatible with popular SG90, MG90S and MG996R servos
  • Leaves unused Pico pins free for extra sensors or modules
  • Includes C/C++ and MicroPython examples for faster development

Servo driver for Raspberry Pi Pico

This module adds up to 16-channel PWM outputs with 16-bit resolution to any Raspberry Pi Pico series board. It targets makers building robotic arms, hexapod walkers or other multi-servo projects that exceed the Pico’s native PWM count.

On-board regulator and exposed pins

An integrated 5 V regulator delivers up to 3 A from the VIN terminal, enabling battery-powered operation without a separate supply. Unused Pico pins remain accessible for additional sensors or communication modules, and standard servo headers accept common models such as SG90, MG90S and MG996R.

Sixteen channels and 3 A headroom

Sixteen independent channels handle simultaneous servo motion for complex gaits or articulated arms. The 3 A regulator ceiling limits the total servo count under load, so projects demanding many high-torque servos at once will need an external power solution.

Privalumai

  • Drives up to 16 servos with precise 16-bit PWM control
  • Powers servos from batteries via integrated 5 V, 3 A regulator
  • Compatible with popular SG90, MG90S and MG996R servos
  • Leaves unused Pico pins free for extra sensors or modules
  • Includes C/C++ and MicroPython examples for faster development

Specifikacijos

BrandLORDWORLD

Klausimai apie šią prekę

How often will the 5 V, 3 A regulator need replacement under continuous load?

The onboard 5 V regulator is rated for 3 A continuous output and has no user-serviceable parts; it is designed to last the life of the board under normal operating conditions.

What limits the number of servos I can drive simultaneously on the 16 channels?

The 3 A regulator sets the practical limit; total stall current of all connected servos must stay below 3 A, so high-torque units like the MG996R reduce the usable channel count.

How much heat does the board generate when all 16 channels run all day?

Heat comes mainly from the 5 V regulator dropping the VIN voltage at up to 3 A; with typical hobby servos the board runs warm but stays within safe limits without extra cooling.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.