Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Clear acrylic enclosure for Jetson Nano board with cut-outs for ports and fan mount

LORDWORLD

LORDWORLD Acrylic Case Type A for Jetson Nano Developer Kit

SKU CH-B1YK-BKWR7

Acrylic enclosure for the Jetson Nano Developer Kit with a fan mount, dust resistance and openings that keep every peripheral connector accessible

  • Acrylic construction shields the board from dust
  • Clever opening design keeps every peripheral connector reachable
  • Built-in fan mounting lets you add active cooling
  • Type A fit matches the Jetson Nano Developer Kit exactly
  • Lightweight transparent shell shows the hardware while protecting it

Acrylic case for Jetson Nano Developer Kit

This transparent acrylic enclosure is designed specifically for the Jetson Nano Developer Kit. It provides a protective shell that keeps the board free from dust while maintaining a clean, professional appearance. The case suits makers, students and engineers who want a lightweight housing for edge-AI prototypes.

Passive shell with optional fan support

The acrylic construction relies on natural convection for heat dissipation during normal operation. A mounting point is included for a cooling fan, allowing builders to add active airflow when workloads demand it. No power draw or noise is introduced by the case itself.

Open access to all peripheral connectors

A clever cut-out layout leaves every port on the Jetson Nano reachable without removing the board. The case secures with screws, so it stays rigid during transport yet can be opened quickly for hardware changes. It adds minimal bulk, leaving room in tight project enclosures.

Privalumai

  • Acrylic construction shields the board from dust
  • Clever opening design keeps every peripheral connector reachable
  • Built-in fan mounting lets you add active cooling
  • Type A fit matches the Jetson Nano Developer Kit exactly
  • Lightweight transparent shell shows the hardware while protecting it

Specifikacijos

BrandLORDWORLD

Klausimai apie šią prekę

How do I fit the Jetson Nano board into this Type A acrylic case without blocking the peripheral cut-outs?

Align the board mounting holes with the case standoffs, secure the supplied screws, then snap the top panel on; the clever opening design keeps every connector accessible without further adjustment.

Will the acrylic panels or the optional cooling fan need periodic replacement?

The acrylic is a passive structural part with no wear items; the supported fan is a standard 5 V unit you can swap yourself if it ever fails, but the case itself requires no scheduled maintenance.

What thermal limit appears first when the Jetson Nano runs sustained loads inside this case with the fan fitted?

The Jetson Nano's own thermal management will throttle the processor before the acrylic enclosure or the optional fan reach any material limit.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.