Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Ten spools of 1.75 mm PLA filament in rainbow colours, each spool 2.2 lb

MakerBot

MakerBot 900-0148A Sketch PLA 1.75mm Rainbow Filament 10-Pack 3d printers accessory

SKU CH-3GEW-R9R0Y MPN 900-0148A

Ten 1.75 mm PLA spools optimised for MakerBot Sketch and Sketch Large printers, producing rigid glossy parts with breakaway supports

  • Ten rainbow spools keep classroom projects colourful and varied
  • 75 mm diameter fits Sketch and Sketch Large printers without adjustment
  • PLA prints rigid glossy parts that handle easily in educational settings
  • Breakaway supports release quickly for faster turnaround on student models
  • Corn-based PLA biodegrades under industrial conditions for greener printing

Classroom PLA filament pack

This MakerBot 900-0148A Sketch PLA 1.75mm Rainbow Filament 10-Pack supplies ten spools of polylactic acid filament for 3D printing. Each spool weighs 2.2 lb and the material produces rigid, glossy parts. The filament is optimised for MakerBot Sketch and Sketch Large printers. It works well with breakaway supports for faster print completion.

Educational and hobbyist users

Teachers and students running Sketch-class printers in classrooms or makerspaces will find the pack convenient. The corn-based PLA is biodegradable under industrial conditions and suits office-friendly environments. Users with printers that require 1.75 mm filament outside the Sketch ecosystem should verify compatibility first. Those needing other diameters or proprietary cartridge systems must look elsewhere.

1.75 mm diameter specification

The filament diameter is 1.75 mm and the pack contains ten spools. This single dimension determines whether the material will feed correctly in a given printer. Buyers must confirm their machine accepts 1.75 mm PLA before purchasing.

Privalumai

  • Ten rainbow spools keep classroom projects colourful and varied
  • 75 mm diameter fits Sketch and Sketch Large printers without adjustment
  • PLA prints rigid glossy parts that handle easily in educational settings
  • Breakaway supports release quickly for faster turnaround on student models
  • Corn-based PLA biodegrades under industrial conditions for greener printing

Specifikacijos

BrandMakerbot
Model900-0115A
Siuntos svoris13.54 kg
Pakuotės dydis231 × 231 × 231 mm

Klausimai apie šią prekę

How often will I need to replace a 2.2 lb spool from this 10-pack during regular classroom printing?

Each 2.2 lb spool lasts for many classroom projects; replacement frequency depends on print volume and model size, so monitor remaining filament per job.

What limits continuous printing when running a MakerBot Sketch all day with this PLA?

The practical limit is spool capacity — each 2.2 lb roll must be swapped when empty, so plan reloads around long print queues.

Does the filament produce noticeable heat or odor when the printer runs all day in an office?

PLA is office-friendly with low odor and minimal heat emission during extended prints, making it suitable for classroom environments.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.