Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

Maxtor

Maxtor DiamondMax 10 200GB 7200RPM SATA 3.5" internal hard drive

SKU CH-Y8XM-7K2MB

200 GB desktop drive spinning at 7200 RPM with 8 MB buffer on a SATA 150 interface

  • 200 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB buffer smooths burst data transfers
  • SATA 150 interface connects to standard motherboards
  • 5 inch form factor fits typical drive bays

Maxtor DiamondMax 10 200 GB SATA drive

The Maxtor DiamondMax 10 is a 3.5 inch internal hard drive with a 200 GB capacity and a 7200 RPM spindle speed. It connects via a SATA 150 interface and includes an 8 MB buffer. The drive is supplied new in retail or OEM packaging.

Suits desktop storage upgrades; not for laptop bays

This unit fits standard 3.5 inch drive bays in desktop computers and serves as primary or secondary storage for home or office systems. It is not suitable for 2.5 inch laptop bays, external enclosures without a 3.5 inch adapter, or systems that require a SATA 3 Gb/s or 6 Gb/s interface for full performance.

SATA 150 interface determines host compatibility

The drive uses the SATA 150 standard, so the motherboard or controller must provide a matching SATA port. If the host only supports newer SATA revisions, the drive will negotiate down to 150 MB/s; if the host lacks SATA entirely, the drive cannot be connected.

Privalumai

  • 200 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB buffer smooths burst data transfers
  • SATA 150 interface connects to standard motherboards
  • 5 inch form factor fits typical drive bays

Specifikacijos

BrandMaxtor

Klausimai apie šią prekę

What are the physical dimensions of the 3.5" drive for case clearance?

The drive measures 5.8 inches deep, .5 inch wide and 1 inch high, fitting standard 3.5 inch internal bays.

How is the SATA/150 interface connected during installation?

Attach a standard SATA data cable to the drive interface and a SATA power connector from the power supply; the step often missed is securing both cables firmly to prevent disconnection.

When should the 8 MB buffer drive be replaced under normal desktop use?

Plan replacement after three to five years or if SMART diagnostics report reallocated sectors, as the 7200 RPM mechanism wears over time.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.