Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver rectangular 3.5 inch bare hard drive with circuit board visible

Maxtor

Maxtor DiamondMax 10 6B160P0 160GB 7200 RPM 8MB IDE Ultra ATA133 3.5" internal hard drive

SKU CH-W097-1Q6H5 MPN 6B160P0

160 GB 3.5" IDE desktop drive at 7200 RPM with 8 MB cache and fluid-dynamic bearing for quiet operation

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity160GB
  • RPM7200 RPM
  • Cache8MB
  • Average Seek Time9ms
  • 7200 RPM spindle delivers fast desktop performance
  • 160 GB capacity stores large file collections
  • 8 MB cache speeds up frequent data access
  • Fluid dynamic bearing motor reduces operational noise
  • Shock and Data Protection Systems guard stored information

Maxtor DiamondMax 10 160GB IDE drive

The Maxtor DiamondMax 10 6B160P0 is a 160GB desktop hard drive that spins at 7200 RPM with an 8MB cache. It connects through the IDE Ultra ATA133 interface in a standard 3.5 inch form factor. The bare drive unit includes fluid dynamic bearing motor technology for quiet operation.

Suits older IDE desktop upgrades

This drive serves systems that require an IDE Ultra ATA133 connection for storage expansion or replacement. The 7200 RPM spindle speed and 8MB buffer support typical desktop workloads. Builders whose motherboards lack IDE headers cannot install this drive without an adapter.

Interface decides compatibility

The IDE Ultra ATA133 interface is the single specification that determines whether this drive fits a given system. Motherboards must provide a matching 40-pin IDE connector and BIOS support for 160GB capacity. Without that interface the drive cannot be used.

Privalumai

  • 7200 RPM spindle delivers fast desktop performance
  • 160 GB capacity stores large file collections
  • 8 MB cache speeds up frequent data access
  • Fluid dynamic bearing motor reduces operational noise
  • Shock and Data Protection Systems guard stored information

Specifikacijos

BrandMaxtor
SeriesDiamondMax 10
Model6B160P0
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity160GB
RPM7200 RPM
Cache8MB
Average Seek Time9ms
Average Latency4.17ms
FeaturesFluid dynamic bearing motor for quiet operation
Maxtor-developed Shock Protection, System (SPS) and Data Protection System (DPS).
Form Factor3.5"
Siuntos svoris0.45 kg
Pakuotės dydis152 × 102 × 51 mm

Klausimai apie šią prekę

What 3.5-inch bay and IDE Ultra ATA133 connector does this bare drive need to fit and mount?

It fits a standard 3.5-inch internal bay and connects via a 40-pin IDE Ultra ATA133 interface; secure it with four side or bottom mounting screws.

How do I install the Maxtor 6B160P0, and which jumper setting do people often miss?

Attach the IDE data cable and 4-pin Molex power, then set the rear jumper to Master, Slave or Cable Select to match your motherboard configuration.

When will the 7200 RPM fluid dynamic bearing motor or 8 MB cache need replacement?

The fluid dynamic bearing motor and 8 MB cache are sealed inside the drive; no user maintenance is required, but keep backups as mechanical drives can fail over time.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.