Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green printed circuit board with black memory chips and gold contacts

Micron Technology, Inc.

Micron Technology, Inc. 2GB DDR3-1600 CL11 1.5V UDIMM CXC

SKU CH-1C16-HY5MG

2GB DDR3-1600 desktop memory module with CL11 latency, 1.5V operation and 240-pin UDIMM form factor

  • Capacity2GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • 2GB capacity for basic desktop tasks using a single 2GB module
  • DDR3-1600 speed rated at PC3-12800 for responsive data transfer
  • CL11 CAS latency keeps access times tight for everyday workloads
  • 5V standard voltage fits mainstream DDR3 motherboards without extra configuration
  • 240-pin UDIMM form factor installs directly into desktop DIMM slots

2 GB DDR3-1600 UDIMM for Desktop Upgrades

This module provides 2 GB of DDR3 memory rated at 1600 MT/s with a CAS latency of CL11. It uses a standard 240-pin unbuffered DIMM form factor and operates at 1.5 V. The single-rank design uses eight 256x8 chips and carries the CXC part code.

Suits older desktops needing a single 2 GB stick

Builders repairing or upgrading legacy DDR3 systems that accept PC3-12800 modules will find this a direct match. Systems requiring ECC, registered memory, higher capacities per slot, or a different DDR generation cannot use this module.

Deciding spec: DDR3-1600 CL11 at 1.5 V

The motherboard must support DDR3 at 1600 MT/s with CL11 timing and 1.5 V unbuffered DIMMs. If the platform requires a different speed, voltage, or memory type, this module will not function.

Privalumai

  • 2GB capacity for basic desktop tasks using a single 2GB module
  • DDR3-1600 speed rated at PC3-12800 for responsive data transfer
  • CL11 CAS latency keeps access times tight for everyday workloads
  • 5V standard voltage fits mainstream DDR3 motherboards without extra configuration
  • 240-pin UDIMM form factor installs directly into desktop DIMM slots

Specifikacijos

Capacity2GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11

Klausimai apie šią prekę

Should I choose the single 2 GB module or add a second stick for dual-channel?

Each stick is a single-rank 1Rx8 module; installing two identical sticks lets the memory controller run in dual-channel mode and doubles peak bandwidth.

What does the DDR3-1600 CL11 rating deliver in everyday use?

The module runs at 1600 MT/s with a CAS latency of 11 cycles, giving a theoretical peak transfer rate of 12 800 MB/s for typical desktop workloads.

Will the 240-pin DDR3 interface fit my motherboard and what speed does it cap at?

The 240-pin UDIMM fits standard DDR3 desktop slots and is rated for DDR3-1600; the system will automatically run it at the highest speed the board supports up to that limit.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.