Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black rectangular AT power supply unit with bird's nest ventilation holes and modular cables visible

myVolts

myVolts 2000W AT Mining Power Supply

SKU CH-SWHJ-GJ00W

A 2000W AT power supply with 80 Plus Platinum 95% efficiency, 16 PCIe connectors, 9 SATA ports and a 140mm dual ball-bearing fan for 6 to 8 GPU mining rigs

  • TypeAT
  • High efficiency with 80 Plus Platinum 95% rating
  • 2000W output supports up to 16 GPU power connectors
  • 140mm dual ball bearing fan for quiet cooling
  • Passive PFC handles 180-264V universal AC input
  • Multiple protections include short circuit and overload safety

2000W AT Mining Power Supply

The myVolts 2000W AT power supply is built for cryptocurrency mining rigs that run multiple graphics cards continuously. It delivers up to 2000W of rated power with 80 Plus Platinum certified efficiency reaching 95 percent. The unit includes a 24-pin connector, one 8-pin CPU connector, five IDE connectors, six SATA connectors and sixteen 8-pin (6+2) PCIe connectors to support six to eight GPUs.

Replaces Lower-Capacity PSUs In Multi-GPU Rigs

A single 2000W unit replaces the need for daisy-chaining multiple smaller supplies when powering six to eight graphics cards. The jump is worth it when a rig demands stable 12V delivery across sixteen PCIe connectors without adapters. Builders who need fewer than six GPUs or who require an ATX form factor for standard cases will not use the full connector count or the AT layout.

Sustained Load Behaviour With Dual Ball-Bearing Fan

Under continuous mining loads the 140mm dual ball-bearing fan maintains airflow while the passive PFC design handles universal AC input from 180 to 264V. The supply is tested for stable output voltage and includes protections against short circuit, overload, overheating and low voltage. The black painted steel shell with bird's nest ventilation assists heat dissipation during 24/7 operation.

Privalumai

  • High efficiency with 80 Plus Platinum 95% rating
  • 2000W output supports up to 16 GPU power connectors
  • 140mm dual ball bearing fan for quiet cooling
  • Passive PFC handles 180-264V universal AC input
  • Multiple protections include short circuit and overload safety

Specifikacijos

TypeAT

Klausimai apie šią prekę

What connectors does the 2000W AT mining PSU include for GPUs and storage?

The unit ships with sixteen 8-pin (6+2) GPU connectors and six SATA connectors for drives.

How do I avoid a short circuit when wiring this mining power supply for the first time?

Separate the GPU cables from the single 8-pin CPU cable before plugging them in; mixing the two causes a short.

When will the 140mm dual ball-bearing fan need replacement in a 24/7 mining rig?

Dual ball-bearing fans typically run several years continuously; listen for bearing noise or reduced airflow as a replacement cue.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.