Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Compact silver 300W AT power module with 24-pin ATX and 12V DC cables

myVolts

myVolts 300W AT Power Supply Module 12V DC Mini-ITX 1U

SKU CH-A6A7-G7DY6

Compact AT power module delivers 300 W from 12 V DC input with over-current and short-circuit protection for Mini-ITX and 1U cases

  • TypeAT
  • 300 W output powers demanding mini-ITX builds
  • 12 V DC input simplifies integration with external adapters
  • Industrial solid capacitors ensure stable high-temperature operation
  • Over-current and short-circuit protection safeguards connected components
  • Compact 154 × 35 × 15 mm board fits 1U and space-constrained cases

Compact AT Power Module for Mini-ITX and 1U Systems

This 300 W AT-type power supply module accepts a 12 V DC input between 11.4 V and 12.6 V and delivers up to 25 A. It is built for Mini-ITX boards and 1U chassis where space is tight and an external adapter provides the DC source. Industrial solid capacitors give stable operation from 0 °C to 55 °C.

Plug-and-Play Install with Included Cables

A 24-pin ATX cable and a 24-pin to 20-pin adapter cable ship in the box, so the module connects directly to the motherboard without extra wiring. The DC input cable attaches to the required 12 V adapter. Over-current and short-circuit protection engage automatically if a fault occurs. The board measures approximately 154 mm by 35 mm by 15 mm, fitting the target form factors.

300 W Continuous with 85 % Efficiency

At full load the unit draws 25 A from the adapter and converts power at 85 % efficiency, leaving headroom for typical Mini-ITX platforms, HTPCs, POS terminals or thin servers. Output drops if the adapter cannot sustain 12 V at 25 A or if ambient temperature exceeds 55 °C. Storage extremes reach -40 °C to 70 °C, but operating limits are stricter.

Privalumai

  • 300 W output powers demanding mini-ITX builds
  • 12 V DC input simplifies integration with external adapters
  • Industrial solid capacitors ensure stable high-temperature operation
  • Over-current and short-circuit protection safeguards connected components
  • Compact 154 × 35 × 15 mm board fits 1U and space-constrained cases

Specifikacijos

TypeAT

Klausimai apie šią prekę

How can I confirm the module is delivering stable power after I connect it to a 12V DC source?

The unit includes over-current and short-circuit protection; if the system powers on and runs without shutdowns, the 300W output at 85% efficiency is operating correctly.

What cables are included and do I need a separate 12V DC adapter?

The package supplies a 24-pin to 20-pin ATX cable, a DC input cable and an AUX cable; a 12V DC adapter capable of up to 25A must be purchased separately.

Which version of the module fits a Mini-ITX or 1U chassis?

This single AT-type module measures 154 x 35 x 15 mm and is designed specifically for Mini-ITX and 1U cases.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.