Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

myVolts

myVolts ATX-700W 700W ATX power supply 14cm fan 20+4 pin 6 SATA 6+2 pin 1.1m cord

SKU CH-87J9-E1KWC MPN ATX-700W

A 700W ATX power supply with a 14cm thermally controlled fan, active PFC, over 80% efficiency, six SATA and two 6+2 pin connectors, plus a 1.1m cord

  • TypeAT
  • Quiet operation with a 14 cm fan that adjusts speed via a thermal sensor
  • Simple installation using clearly marked connectors for every cable
  • Efficient power delivery rated above 80 % at 700 W output
  • Worldwide compatibility with 110-230 V auto-switching input voltage
  • Flexible placement thanks to a 1.1 m power cord included in the box

700W ATX supply for basic desktops

This 700W ATX power supply is built for low energy consumption, low noise basic desktop systems. It delivers rated power of 700W with active full voltage PFC and efficiency greater than 80 percent. The unit operates on 110-230V input voltage, making it flexible for different mains supplies. A 1.1m power cord is included in the package.

14cm thermal fan and labelled connectors

A 14cm fan runs under automatic thermal sensor control to keep noise low while maintaining airflow. Connectors carry clear markings so installation is quick, easy and effective. The supply provides a 20+4 pin motherboard interface, 4+4 pin CPU 12V interface, six SATA interfaces, two 6+2 pin video card interfaces and three fan interfaces. Hold-up time exceeds 10ms and rated life is 100000 hours.

Check connectors and power budget before ordering

Verify that your motherboard accepts a 20+4 pin main connector and a 4+4 pin CPU power connector. Confirm that your graphics card or cards use 6+2 pin power inputs and that six SATA connectors cover your storage devices. Ensure the 700W rating matches the total power draw of your components. The unit measures approximately 150 x 160 x 86mm, so confirm it fits your case.

Privalumai

  • Quiet operation with a 14 cm fan that adjusts speed via a thermal sensor
  • Simple installation using clearly marked connectors for every cable
  • Efficient power delivery rated above 80 % at 700 W output
  • Worldwide compatibility with 110-230 V auto-switching input voltage
  • Flexible placement thanks to a 1.1 m power cord included in the box

Specifikacijos

TypeAT

Klausimai apie šią prekę

What input voltage range does the ATX-700W accept?

The unit supports 110-230V AC input, so it works worldwide without a manual voltage switch.

What are the exact dimensions I need to clear in my case?

It measures 150 mm wide, 160 mm deep and 86 mm high — standard ATX depth but verify your chassis clearance.

How do I connect the CPU power correctly?

Plug the 4+4 pin EPS connector into the motherboard 8-pin socket; the split design lets you use either half on 4-pin boards.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.