NEMIX RAM
NEMIX RAM 128GB 2x64GB DDR5 6400 CL52 1.1V ECC RDIMM Kit Supermicro H14DST-FL
A 128GB dual-channel DDR5-6400 ECC registered kit with CL52 latency and 1.1V operation, validated for the Supermicro H14DST-FL motherboard
- Capacity128GB (2 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 128 GB total capacity from a matched 2 × 64 GB kit
- DDR5 6400 speed with CL52 latency at 1.1 V
- ECC and registered design prevents silent data errors
- 288-pin RDIMM form factor built for Supermicro H14DST-FL
- Major OEM Samsung, Micron or Hynix chips ensure enterprise reliability
Exact-match DDR5 RDIMM kit
This 128 GB kit contains two 64 GB DDR5 RDIMM modules rated at 6400 MT/s with CL52 latency and 1.1 V operation. The 2Rx4 registered ECC design matches the Supermicro H14DST-FL memory controller requirements for full-capacity recognition at rated speed.
Suited for validated server upgrades
System builders populating every DIMM slot on the H14DST-FL will benefit from registered buffering that offloads the memory controller. Environments needing consumer UDIMMs, non-ECC modules, or lower-density kits should select different memory.
Sustained-load stability
Registered architecture and on-die ECC maintain data integrity across fully populated channels during continuous workloads. The 1.1 V operating voltage supports consistent throughput without thermal throttling in dense server configurations.
Privalumai
- 128 GB total capacity from a matched 2 × 64 GB kit
- DDR5 6400 speed with CL52 latency at 1.1 V
- ECC and registered design prevents silent data errors
- 288-pin RDIMM form factor built for Supermicro H14DST-FL
- Major OEM Samsung, Micron or Hynix chips ensure enterprise reliability
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 2X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Klausimai apie šią prekę
Do I need a Supermicro H14DST-FL motherboard for this 288-pin RDIMM kit to function?
Yes, this 128 GB kit is validated for the Supermicro H14DST-FL; the board must accept DDR5 6400 RDIMMs at 1.1 V with 2Rx4 organization.
Can I mix these 2Rx4 registered ECC modules with other DDR5 RDIMMs already installed in the system?
Mixing is possible only if the existing modules are also DDR5 RDIMMs running at 1.1 V with matching rank and timing; otherwise the memory controller may downclock or disable slots.
How can I verify the kit is running at its rated 6400 speed and CL52 latency after installation?
Enter the BIOS or use a tool such as CPU-Z to confirm the memory frequency reads 6400 MT/s and the CAS latency shows 52 cycles.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



