NEMIX RAM 128GB (4x32GB) DDR5 6400 CL52 1.10V 2Rx8 ECC RDIMM memory upgrade

Exact-match 128 GB DDR5-6400 kit

This 128 GB kit contains four 32 GB DDR5-6400 (PC5-51200) registered ECC RDIMMs built to CL52 timings at 1.10 V. The 2Rx8 modules use major-brand Samsung, Micron or Hynix chips and carry the 288-pin form factor required by the GIGABYTE MS04-CE0 motherboard. It is intended for server and workstation builds that demand full-capacity population with error-correcting memory.

Registered ECC architecture for full-slot stability

The registered (buffered) design lightens the load on the memory controller so all four slots can run populated at rated speed without signal degradation. ECC circuitry detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. Buyers must verify their system manual for approved DIMM population order and maximum supported capacity before installation.

Low-voltage DDR5 operation at 1.10 V

Running at the standard DDR5 server voltage of 1.10 V, the modules draw minimal power while maintaining 6400 MT/s throughput. No heat spreaders are fitted, so airflow across the bare PCB is necessary for thermal management in densely populated chassis. Builders who need passive cooling headroom or higher-frequency memory should consider alternative configurations.