Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green bare circuit board with gold edge connector and black memory chips

NEMIX RAM

NEMIX RAM 128GB DDR5 6400MHz 2Rx4 CL52 1.1V ECC Registered RDIMM memory upgrade for Supermicro H13SSL-NT

SKU CH-QRHW-VYFRK

128GB DDR5 6400MHz ECC Registered RDIMM with 2Rx4 organisation, CL52 latency and 1.1V operation, validated for the Supermicro H13SSL-NT motherboard

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 128GB capacity expands server memory headroom for virtualisation and databases
  • DDR5 6400 speed delivers PC5-51200 bandwidth for data-intensive workloads
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 2Rx4 1.1V CL52 timings match Supermicro H13SSL-NT memory controller requirements exactly
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the target motherboard

Server-Specific DDR5 RDIMM Upgrade

This NEMIX RAM module delivers 128GB of DDR5 6400 memory in a 288-pin Registered ECC RDIMM form factor. It operates at 1.1V with CL52 latency and a 2Rx4 rank configuration. The part is validated for the Supermicro H13SSL-NT motherboard to ensure full-capacity recognition and rated-speed operation.

Suited For Single-DIMM Server Population

System administrators expanding compatible Supermicro servers with a single registered ECC module will match the required voltage, timing, and rank. Builders needing UDIMM, SODIMM, or non-ECC unbuffered memory for workstation or consumer boards cannot use this RDIMM.

Registered ECC Architecture Decides Fit

The buffered registered design offloads the memory controller to support fully populated slots at full capacity, while on-die ECC corrects single-bit errors to prevent silent data corruption. This RDIMM is mandatory for the target platform; unbuffered alternatives will not function.

Privalumai

  • 128GB capacity expands server memory headroom for virtualisation and databases
  • DDR5 6400 speed delivers PC5-51200 bandwidth for data-intensive workloads
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 2Rx4 1.1V CL52 timings match Supermicro H13SSL-NT memory controller requirements exactly
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the target motherboard

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Klausimai apie šią prekę

My Supermicro H13SSL-NT has 13 DIMM slots; do I need to fill specific ones first for this 128 GB RDIMM to be recognised?

Yes — consult the motherboard manual for the approved population order. The board requires 288-pin Registered DDR5 DIMMs, and this 2Rx4 CL52 1.10 V kit matches the exact rank, voltage and timing the memory controller expects.

Can I run this 2Rx4 Registered ECC DDR5 module alongside 1Rx4 or 2Rx8 DDR5 RDIMMs already installed in the same server?

Mixing different ranks or organisations is not recommended. The memory controller is tuned for 2Rx4 at 6400 MT/s CL52; adding modules with other ranks or timings can force a lower speed or prevent the system from posting.

After installation, how can I confirm the kit is running at 6400 MT/s with ECC active?

Enter the BIOS and verify the memory frequency reads 6400 MT/s (PC5-51200), CAS latency shows CL52, voltage is 1.10 V and ECC status is enabled. Operating-system tools such as dmidecode or CPU-Z will also report the corrected 128 GB capacity and ECC capability.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.