Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green bare circuit board DDR5 RDIMM memory module 288 pins 16GB

NEMIX RAM

NEMIX RAM 16GB 1Rx8 DDR5 4800 CL40 ECC RDIMM for SuperMicro SSG-521E X13SEDW-F memory upgrade

SKU CH-BMMP-QWCNB

16 GB DDR5-4800 ECC registered RDIMM for SuperMicro SSG-521E and X13SEDW-F servers

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 4800 boosts server throughput
  • ECC RDIMM protects data integrity under load
  • 1Rx8 single-rank design keeps latency low
  • 1 V operation reduces power draw
  • Validated for SuperMicro SSG-521E and X13SEDW-F

System-specific DDR5 ECC RDIMM

This NEMIX RAM module is built for SuperMicro Storage SuperServer SSG-521E and X13SEDW-F platforms. It delivers 16GB of registered DDR5 memory with error-correcting code for data integrity in server workloads. The single 288-pin DIMM operates at 1.10V and targets administrators upgrading compatible SuperMicro systems.

Registered DDR5 4800 with CL40 latency

The module runs at DDR5 4800 (PC5-38400) with a CAS latency of CL40 and a 1Rx8 organisation. Registered buffering reduces electrical load on the memory controller, allowing stable operation in multi-DIMM server configurations. ECC protection detects and corrects single-bit errors during critical tasks.

16GB capacity for memory-bound services

A single 16GB rank suits virtualisation hosts, database nodes and storage appliances that need ECC reliability without populating every slot. Workloads requiring larger per-socket memory footprints or higher bandwidth than 4800 MT/s will exceed this module's headroom.

Privalumai

  • 16 GB DDR5 4800 boosts server throughput
  • ECC RDIMM protects data integrity under load
  • 1Rx8 single-rank design keeps latency low
  • 1 V operation reduces power draw
  • Validated for SuperMicro SSG-521E and X13SEDW-F

Specifikacijos

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Klausimai apie šią prekę

What does the DDR5 4800 CL40 rating deliver in the SSG-521E?

The module operates at 4800 MT/s with CL40 latency, matching the platform's native DDR5 speed for registered ECC workloads.

How does the 288-pin RDIMM interface limit this upgrade?

The registered 288-pin DDR5 form factor requires a compatible RDIMM slot; it cannot be used in UDIMM or SO-DIMM sockets.

What physical clearance does the 1Rx8 module need inside the SSG-521E?

The bare 288-pin PCB has no heat spreader, so it fits standard DIMM spacing without extra height allowance.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.