Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green circuit boards with black memory chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 SODIMM Kit for POSIFLEX RT-6116

SKU CH-JBJK-0P9TR

16 GB DDR4 SODIMM kit with two 8 GB modules at 2400 MHz CL17 for POSIFLEX RT-6116 terminals

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit boosts POS terminal responsiveness
  • DDR4 2400 speed matches POSIFLEX RT-6116 specs
  • CL17 latency supports stable transaction processing
  • 2 V operation keeps power draw low
  • 260-pin SODIMM form factor fits the terminal slot

System-specific DDR4 SODIMM kit

This 16GB kit contains two 8GB modules built for the POSIFLEX RT-6116 terminal. Each stick is a 260-pin DDR4 SODIMM rated at 2400 MT/s with CL17 latency. The unbuffered, non-ECC design matches the original system specification.

Low-voltage operation without active cooling

Modules run at 1.20V and have no heat spreader, relying on the terminal's internal airflow. The 2Rx8 organisation and standard JEDEC timings keep power draw predictable during continuous point-of-sale workloads. No fan or extra clearance is required.

Ready-to-install matched pair

The kit ships as a validated 2x8GB set so both slots receive identical modules. No software, drivers or configuration utilities are bundled; the upgrade is completed by physical installation alone. Buyers needing ECC, registered DIMMs or higher capacities must choose a different product.

Privalumai

  • 16 GB kit boosts POS terminal responsiveness
  • DDR4 2400 speed matches POSIFLEX RT-6116 specs
  • CL17 latency supports stable transaction processing
  • 2 V operation keeps power draw low
  • 260-pin SODIMM form factor fits the terminal slot

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

Klausimai apie šią prekę

How do I install the 260-pin SODIMM kit in the RT-6116 and what step is often missed?

Power off the terminal, open the memory door, align the notch on each 260-pin module with the slot key, press firmly until the side clips click, then replace the cover and power on to verify 16 GB is detected.

What maintenance or replacement will this 1.20 V DDR4 kit need later?

No scheduled maintenance is required; the modules have no heat spreader and run at 1.20 V, so only replace them if a memory test reports errors or the terminal fails to boot.

What limit appears first when the POSIFLEX RT-6116 runs sustained workloads with CL17 memory?

The CL17 latency at 2400 MT/s sets the bandwidth ceiling; under continuous load the memory controller hits that timing limit before thermal throttling becomes a factor.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.