Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green DDR4 SODIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 260-Pin SODIMM Kit for POSIFLEX ZT-3716

SKU CH-Z5CD-4NNK1

16 GB dual-channel DDR4 3200 SODIMM kit validated for POSIFLEX ZT-3716 terminals

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 3200 CL22 timing matches POSIFLEX ZT-3716 spec
  • 2 V operation keeps power draw low in kiosk use
  • 260-pin SODIMM form factor fits ZT series slots directly
  • Major-brand Samsung, Micron or Hynix chips ensure stability

Targeted POS Terminal Memory Upgrade

This kit supplies 16 GB of DDR4 memory in a matched pair of 8 GB SODIMM modules. It is built specifically for the POSIFLEX ZT-3716 Haydn ZT Series point-of-sale terminal. The modules run at 3200 MT/s with CL22 latency at 1.20 V.

Suits Single-Channel POS Maintenance

Technicians servicing the ZT-3716 platform can use this kit to restore or expand system memory to the factory specification. Builders assembling custom POS hardware, or anyone needing ECC error correction, should look at a different module type.

Fits 260-Pin SODIMM Slots Directly

The unbuffered, non-ECC design drops into the terminal's existing memory sockets without extra configuration. Using major OEM Samsung, Micron or Hynix components, the kit frees the installer from sourcing individual sticks and matching timings manually.

Privalumai

  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 3200 CL22 timing matches POSIFLEX ZT-3716 spec
  • 2 V operation keeps power draw low in kiosk use
  • 260-pin SODIMM form factor fits ZT series slots directly
  • Major-brand Samsung, Micron or Hynix chips ensure stability

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

Klausimai apie šią prekę

What type of POSIFLEX terminal must I own for this 260-pin DDR4 SODIMM kit to fit?

This kit is built for the POSIFLEX ZT-3716 Haydn ZT Series POS terminal, matching its 260-pin DDR4 SODIMM slots exactly.

If I keep one existing 8 GB DDR4 module, will this 2x8 GB CL22 kit run stably alongside it?

Mixing ranks or latencies can cause instability; the kit is validated as a matched 16 GB pair at CL22, so replacing all modules is recommended.

How do I confirm the kit is running at the rated 3200 MT/s and CL22 after installation?

Check the memory speed and CAS latency in the terminal’s BIOS or a system-information utility; they should show DDR4-3200 and CL22.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.