Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 CL17 260-PIN SODIMM for POSIFLEX HS-6514 memory upgrade

SKU CH-JKP7-PZWER

16 GB DDR4 SODIMM running at 2400 MHz CL17 for POSIFLEX HS-6514 terminals

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 2400 MHz boosts POS terminal speed
  • CL17 latency at 1.2 V keeps data flow steady
  • 260-pin SODIMM fits HS-6514 slot directly
  • Major-brand Samsung, Micron, Hynix chips ensure reliability
  • Single 16 GB module simplifies upgrade path

System-Specific SODIMM for POSIFLEX HS-6514

This NEMIX RAM module is built for the POSIFLEX HS-6514 high-end compact all-in-one terminal. It provides a 16GB DDR4 upgrade for point-of-sale and kiosk systems that require reliable memory. The part number MS19200-628K1 identifies the exact configuration tested for this platform.

DDR4 2400 CL17 2Rx8 Unbuffered specification

The module runs at DDR4 2400 (PC4-19200) with CAS latency CL17 and a 2Rx8 organisation. It is non-ECC, unbuffered, and operates at 1.20V using major OEM chips from Samsung, Micron or Hynix. This specific combination of speed, latency, rank and voltage determines whether the terminal will POST and run stably.

Low-voltage operation without heat spreader

At 1.20V the SODIMM draws minimal power and produces little heat during normal terminal workloads. No heat spreader is fitted, so the module relies on the system's internal airflow. The low voltage and unbuffered design keep acoustic impact negligible in the compact all-in-one chassis.

Privalumai

  • 16 GB DDR4 2400 MHz boosts POS terminal speed
  • CL17 latency at 1.2 V keeps data flow steady
  • 260-pin SODIMM fits HS-6514 slot directly
  • Major-brand Samsung, Micron, Hynix chips ensure reliability
  • Single 16 GB module simplifies upgrade path

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-628K1
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

Klausimai apie šią prekę

Will 2400 MT/s actually run at that speed in the POSIFLEX HS-6514?

The module is rated DDR4 2400 PC4-19200; the terminal's memory controller will set the final operating frequency, which cannot exceed the module's rated speed.

Does the 260-pin SODIMM slot in the HS-6514 accept this non-ECC unbuffered stick?

Yes — the kit is a 260-pin DDR4 SODIMM, non-ECC and unbuffered, matching the slot type used in the POSIFLEX HS-6514.

Will the 16 GB single-rank 2Rx8 module fit the compact chassis without a heat spreader?

The stick has no heat spreader and uses the standard 260-pin SODIMM form factor, so it fits the slim all-in-one enclosure.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.