Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green printed circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 288-Pin UDIMM desktop RAM

SKU CH-EHMJ-7Z97E

16 GB DDR4 2666 CL19 desktop memory in a single 288-pin UDIMM running at 1.2 V

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo

Capacity 16GB

  • 16 GB capacity boosts multitasking headroom
  • DDR4 2666 speed delivers responsive data throughput
  • CL19 latency supports smooth everyday performance
  • 2 V operation reduces system power draw
  • 288-pin UDIMM fits standard desktop motherboards

16GB DDR4 2666 UDIMM for desktop upgrades

This NEMIX RAM module delivers 16GB of DDR4 memory at 2666MHz with CL19 latency. It uses a standard 288-pin UDIMM form factor and runs at 1.2V. The kit is a single 16GB stick built with major OEM chips from Samsung, Micron, or Hynix. It targets desktop users adding capacity to a compatible motherboard.

CL19 latency at 2666MHz speed

The module operates at DDR4 2666 (PC4-21300) with a CAS latency of CL19. This timing figure determines how quickly the memory responds to read requests. It is a non-ECC, unbuffered design without a heat spreader or LED lighting. The 2Rx8 organisation is set by the manufacturer and cannot be changed.

Fits standard DDR4 desktop slots

Installation requires a motherboard with 288-pin DDR4 DIMM slots that accept non-ECC unbuffered UDIMMs. The single-stick layout leaves additional slots free for future expansion if the board has more than one. No extra power cables or cooling are needed beyond the slot itself.

Privalumai

  • 16 GB capacity boosts multitasking headroom
  • DDR4 2666 speed delivers responsive data throughput
  • CL19 latency supports smooth everyday performance
  • 2 V operation reduces system power draw
  • 288-pin UDIMM fits standard desktop motherboards

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD21300-628K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How fast will my desktop run with DDR4 2666 CL19 memory installed?

The module operates at 2666 MT/s with a CAS latency of 19, so data transfers peak at the PC4-21300 rate once the motherboard enables the XMP or JEDEC profile.

What does the 288-pin UDIMM interface limit in my system?

The 288-pin DDR4 UDIMM slot caps memory speed to the board's maximum supported DDR4 frequency and prevents use of ECC or registered modules.

Will this stick fit in a standard desktop DIMM slot without a heat spreader?

Yes, the bare 288-pin PCB measures the standard UDIMM height and requires only a regular unbuffered DDR4 slot; no extra clearance is needed.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.