Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green bare circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 PC4-21300 CL19 2Rx8 1.2V 288-Pin UDIMM memory upgrade

SKU CH-7PTN-X4RFY

A 16 GB DDR4 2666 UDIMM module with CL19 latency, 2Rx8 organisation and 1.2 V operation for compatible desktop systems

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 2666 MHz boosts multitasking speed
  • CL19 latency keeps response times tight
  • 2 V operation lowers power draw
  • 288-pin UDIMM fits standard desktop slots
  • 2Rx8 dual-rank design increases memory bandwidth

Desktop DDR4 upgrade

This NEMIX RAM module adds 16 GB of DDR4 2666 memory to compatible desktop PCs and workstations. It targets users who need a single 288-pin UDIMM to increase capacity without changing voltage or rank configuration. The non-ECC unbuffered design matches mainstream consumer motherboards.

Straightforward DIMM installation

Installation follows the standard UDIMM procedure: power down, open the case, align the notch and press until the latches click. The only common issue is mixing this 2Rx8 rank layout with existing modules of a different rank, which can prevent the system from posting. Verify the motherboard supports 2Rx8 before adding.

Capacity and speed match

The 16 GB capacity at 2666 MHz (PC4-21300) with CL19 latency is the single specification that determines fit. If your board requires a different speed, rank or voltage, this module will not work. Buyers who need ECC, registered buffering or a different density should select another part.

Privalumai

  • 16 GB DDR4 2666 MHz boosts multitasking speed
  • CL19 latency keeps response times tight
  • 2 V operation lowers power draw
  • 288-pin UDIMM fits standard desktop slots
  • 2Rx8 dual-rank design increases memory bandwidth

Specifikacijos

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2666MHZ Non-ECC Unbuffered UDIMM
Part NumberMD21300-628K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM

Klausimai apie šią prekę

How can I verify the module is running at 2666 MT/s and CL19 after installation?

Open your BIOS or a tool such as CPU-Z and confirm the memory frequency shows 2666 MT/s with timings of 19-19-19 at 1.20 V.

What does the package contain and is anything else required?

The box includes one 16 GB 288-pin DDR4 UDIMM; no extra cables, brackets or heat spreaders are needed for installation.

Should I choose the 2Rx8 16 GB stick or look for a different rank configuration?

This 2Rx8 16 GB module matches the Hynix HMA82GU6DJR8N?VK specification; select it when your board requires a dual-rank 16 GB DIMM.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.