BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00279455BTC
Yra sandėlyje
NEMIX RAM
NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 1.1V UDIMM for ASRock Rack W680D4ID-2T/G5/X550
16GB DDR5 5600 CL46 1.1V UDIMM validated for ASRock Rack W680D4ID-2T/G5/X550 motherboards
- Capacity16GB
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16 GB capacity expands system memory for heavier workloads
- DDR5 5600 speed delivers high data throughput for responsive performance
- CL46 latency supports stable operation at rated frequency
- 1 V operation reduces power draw and heat output
- Validated for ASRock Rack W680D4ID-2T/G5/X550 motherboard compatibility
System-Specific DDR5 Memory
This NEMIX RAM module is a 16GB DDR5 5600 UDIMM built for the ASRock Rack W680D4ID-2T/G5/X550 motherboard. It runs at PC5-44800 speed with CL46 latency and 1.10V operation. The single 1Rx8 rank uses unbuffered non-ECC chips from major OEM suppliers. No heat spreader is fitted on the 288-pin stick.
Builders with that exact ASRock Rack board
This kit suits anyone upgrading or repairing the named W680D4ID-2T/G5/X550 platform. It will not help owners of other motherboards, laptops, or servers that require ECC, registered DIMMs, SODIMM form factor, or a different DDR generation. Buyers needing higher capacity per slot or lower latency timings should look elsewhere.
DDR5 5600 CL46 1.10V UDIMM specification
The decisive figure is the 5600 MT/s speed combined with CL46 latency at 1.10V on a 288-pin unbuffered non-ECC module. If the ASRock Rack W680D4ID-2T/G5/X550 manual lists this exact data rate and timing, the part will work. If the board requires ECC, registered, or a different voltage, this module is not compatible.
Privalumai
- 16 GB capacity expands system memory for heavier workloads
- DDR5 5600 speed delivers high data throughput for responsive performance
- CL46 latency supports stable operation at rated frequency
- 1 V operation reduces power draw and heat output
- Validated for ASRock Rack W680D4ID-2T/G5/X550 motherboard compatibility
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K1 |
| Capacity | 16GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM |
Klausimai apie šią prekę
Will this 16GB DDR5 5600 CL46 module run alongside my existing DDR5 memory in the ASRock Rack W680D4ID-2T/G5/X550?
This module runs at 5600 MT/s with CL46 latency and 1.10 V. For stable operation, any other installed DDR5 must match the same speed, voltage and timing; otherwise the system will downclock all modules to the slowest common settings.
How can I confirm the module is running at 5600 MT/s and CL46 after installation?
Enter the system BIOS or UEFI and open the memory information screen; it should report 5600 MT/s (PC5-44800), CAS latency 46 and 1.10 V. You can also use a tool such as CPU-Z in the OS to verify the same figures.
What comes in the package and do I need anything else to install it?
The box contains a single 16 GB 288-pin DDR5 UDIMM (part MD44800-618K1). No heat spreader, cables or tools are included; you only need a compatible motherboard slot and standard anti-static precautions.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00282054BTC
Yra sandėlyje
