Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 ECC UDIMM memory upgrade

SKU CH-RFJB-RYA16

16 GB DDR5-5600 ECC UDIMM module with CL46 latency and 1.1 V operation

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection for data integrity in critical workloads
  • DDR5 5600 speed delivers high bandwidth for demanding applications
  • 1 V operation reduces power draw and heat output
  • Single 16 GB module simplifies capacity scaling
  • 288-pin UDIMM fits compatible Micron server and workstation boards

16GB DDR5 5600 ECC UDIMM

This 16GB DDR5 5600 ECC UDIMM module delivers error-correcting code memory for compatible systems. It operates at 1.10V with CL46 latency in a single-rank 1Rx8 configuration. The 288-pin unbuffered design suits workstations and servers requiring data integrity.

IT buyers needing ECC on DDR5 platforms

Administrators who require ECC protection for DDR5 workstations or servers match this module. Systems that only accept registered DIMMs, non-ECC memory, or lower DDR generations cannot use this part. Buyers without ECC-capable motherboards should look elsewhere.

CL46 CAS latency at 5600 MT/s

The CL46 timing at the 5600 MT/s data rate determines whether this module meets the platform's latency budget. Verify the motherboard or system documentation for supported CAS latency values before purchasing.

Privalumai

  • ECC protection for data integrity in critical workloads
  • DDR5 5600 speed delivers high bandwidth for demanding applications
  • 1 V operation reduces power draw and heat output
  • Single 16 GB module simplifies capacity scaling
  • 288-pin UDIMM fits compatible Micron server and workstation boards

Specifikacijos

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR5 5600MHZ ECC Unbuffered UDIMM
Part NumberME44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMICRON
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 ECC UDIMM
Rank1Rx8
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN ECC Unbuffered UDIMM

Klausimai apie šią prekę

Will the 1Rx8 DDR5 ECC UDIMM need replacement if a memory cell fails?

The module uses ECC to correct single-bit errors and detect multi-bit errors, extending usable life; a permanent cell failure would still require module replacement.

What limits sustained throughput at DDR5 5600 CL46?

The CL46 latency at 5600 MT/s sets the timing ceiling, while the 1Rx8 organisation and single 288-pin channel cap peak bandwidth at PC5-44800.

How much heat and power does the 1.1 V DDR5 module produce running all day?

Operating at 1.1 V without a heat spreader, the 16 GB UDIMM draws low power and runs cool enough for typical server airflow; no active cooling is required.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.