Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 256GB 2x128GB DDR5 4800 ECC RDIMM Supermicro H13SVW-NT-OS1 memory upgrade

SKU CH-2JNS-HMDTM

256 GB DDR5 ECC registered DIMM kit, two 128 GB modules at 4800 MHz CL40 1.1 V, validated for Supermicro H13SVW-NT-OS1

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Rodyti 12 daugiau konfigūracijų
  • 256 GB total capacity from two 128 GB modules
  • DDR5-4800 speed with CL40 latency at 1.10 V
  • ECC and registered design prevents silent data errors
  • 288-pin RDIMM form factor matches Supermicro H13SVW-NT-OS1
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR5 server upgrade

This 256GB kit contains two 128GB DDR5 4800 RDIMMs built to the Supermicro H13SVW-NT-OS1 memory controller specification. Registered ECC architecture with 2Rx4 organisation and CL40 timing at 1.1V ensures the modules are recognised at full capacity and rated speed. It is intended for administrators who need to populate every slot on this specific motherboard without compatibility guesswork.

Sustained-load behaviour

Registered buffering offloads the memory controller so all channels remain stable when fully populated at 4800 MT/s. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. The 1.1V operating voltage keeps power draw predictable under continuous utilisation.

Installation notes

The 288-pin RDIMM form factor fits only the registered DIMM slots defined by the Supermicro H13SVW-NT-OS1 population rules; UDIMM or SODIMM slots will not accept them. No heat spreader is present, so airflow across the modules must follow the chassis design. Builders who need a different capacity or a non-registered module should select another kit.

Privalumai

  • 256 GB total capacity from two 128 GB modules
  • DDR5-4800 speed with CL40 latency at 1.10 V
  • ECC and registered design prevents silent data errors
  • 288-pin RDIMM form factor matches Supermicro H13SVW-NT-OS1
  • Lifetime replacement warranty with US-based technical support

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How much heat and power draw should I expect from the 2x128GB DDR5 4800 kit running continuously in a Supermicro H13SVW-NT-OS1?

The modules operate at 1.1V with no heat spreader, so they rely on chassis airflow; registered ECC RDIMM architecture reduces electrical load on the memory controller, keeping thermals manageable in a properly ventilated server.

What must my Supermicro H13SVW-NT-OS1 already have for this 256GB DDR5 4800 RDIMM kit to function?

The board needs free 288-pin DDR5 RDIMM slots that support 2Rx4 registered ECC modules at 1.1V and a BIOS version that recognises 128GB-per-DIMM density; consult the motherboard manual for approved population order.

Will this 2Rx4 DDR5 4800 CL40 registered ECC kit work alongside any existing DDR5 RDIMMs I keep in the same Supermicro server?

Mixing ranks, speeds or capacities can force the memory controller to downclock or disable slots; for stable operation populate all channels with identical 2Rx4 4800 CL40 1.1V modules per the board's population rules.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.