Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5-5600 ECC Registered RDIMM CL46 1.1V 1Rx8 Supermicro H14SHM memory upgrade

SKU CH-576F-A4XQ1

A 32 GB DDR5-5600 ECC registered RDIMM kit with CL46 latency and 1.1 V operation, validated for the Supermicro H14SHM motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 32 GB total capacity from two 16 GB modules
  • DDR5-5600 speed with PC5-44800 bandwidth rating
  • Registered ECC design corrects single-bit errors automatically
  • CL46 latency at 1.1 V operating voltage
  • Verified fit for Supermicro H14SHM motherboard

Compatible Supermicro H14SHM Upgrade

This 32GB kit contains two 16GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro H14SHM motherboard. The modules run at 1.1V with CL46 latency and a 1Rx8 organisation. They install in the board's 288-pin DIMM slots and operate at the rated PC5-44800 speed.

Suited for ECC Servers Not Consumer Boards

The registered buffer and ECC function are required by the H14SHM platform and provide error correction for production workloads. Builders assembling standard desktop PCs or workstations that accept only unbuffered UDIMMs cannot use this memory. Systems needing SODIMM form factors are also incompatible.

Registered ECC RDIMM Form Factor Decides Fit

The 288-pin Registered (RDIMM) design with on-board ECC is the single specification that determines whether the kit works in the target server. A motherboard that requires unbuffered UDIMMs or non-ECC modules will not recognise these DIMMs. Verify the manual calls for Registered ECC RDIMMs before ordering.

Privalumai

  • 32 GB total capacity from two 16 GB modules
  • DDR5-5600 speed with PC5-44800 bandwidth rating
  • Registered ECC design corrects single-bit errors automatically
  • CL46 latency at 1.1 V operating voltage
  • Verified fit for Supermicro H14SHM motherboard

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the 1Rx8 registered ECC DDR5-5600 modules run at rated speed alongside existing DDR5 RDIMMs in my Supermicro H14SHM?

Yes, if the installed modules are also DDR5-5600 1.10V registered ECC RDIMMs; the memory controller will train all slots to the common 5600 MT/s speed and 1Rx8 timing.

How can I confirm the kit is detected at 32 GB and 5600 MT/s after installation?

Enter the BIOS or UEFI on the Supermicro H14SHM and verify the memory summary shows 32 GB total, 5600 MT/s operating speed, 1.10 V, and ECC enabled.

What ships in the box and is anything else required to install it?

The box contains the 32 GB (2 x 16 GB) DDR5-5600 CL46 1Rx8 registered ECC RDIMM kit only; no extra cables, brackets or tools are included.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.