Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four green DDR4 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2933MHz CL21 ECC UDIMM memory upgrade

SKU CH-DSGE-Q13R4

32 GB kit of four 8 GB DDR4 2933 MHz ECC UDIMM modules at CL21 for Supermicro X12SAE and X12SCA-F boards

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 32GB 4X8GB

  • 32 GB capacity from four 8 GB modules lets you fill the board's slots and run large workloads
  • DDR4-2933 (PC4-23400) speed with CL21 timing matches the controller's rated frequency for stable operation
  • 20 V unbuffered ECC UDIMM design delivers error correction without registered latency
  • 1Rx8 single-rank organisation aligns with the motherboard's population rules for full recognition
  • 288-pin DDR4 form factor fits the Supermicro X12SAE and X12SCA-F boards exactly

Exact-match DDR4 ECC kit for Supermicro X12 boards

This 32 GB kit contains four 8 GB unbuffered ECC UDIMMs rated at DDR4-2933 (PC4-23400) with CL21 timings and 1.20 V operation. The modules use a 1Rx8 organisation and 288-pin layout that matches the memory-controller expectations of the Supermicro X12SAE and X12SCA-F motherboards. Builders who need registered DIMMs or SO-DIMMs should look elsewhere because this kit is strictly unbuffered UDIMM.

ECC protection and verified fitment

On-die error-correcting code detects and corrects single-bit errors in real time, preventing silent data corruption and unexpected reboots during critical workloads. The kit is validated for the exact DIMM population rules of the target Supermicro boards, so the system recognises the full 32 GB at the rated 2933 MT/s without manual tuning. No heat spreaders are included, leaving clearance for dense server chassis.

1Rx8 rank organisation decides compatibility

The single-rank 1Rx8 density per module is the specification that determines whether the motherboard can populate all four slots at the rated speed. Systems requiring dual-rank modules or a different rank-per-channel limit will not support this configuration at full capacity. Consult the board manual for approved population order before purchasing.

Privalumai

  • 32 GB capacity from four 8 GB modules lets you fill the board's slots and run large workloads
  • DDR4-2933 (PC4-23400) speed with CL21 timing matches the controller's rated frequency for stable operation
  • 20 V unbuffered ECC UDIMM design delivers error correction without registered latency
  • 1Rx8 single-rank organisation aligns with the motherboard's population rules for full recognition
  • 288-pin DDR4 form factor fits the Supermicro X12SAE and X12SCA-F boards exactly

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN ECC UDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the 1.20 V ECC UDIMM modules need replacement after a certain number of duty cycles?

DDR4 ECC UDIMM modules have no specified wear-out cycle limit; they remain in service until a hardware fault occurs or the platform is retired.

What limit appears first when the four 1Rx8 sticks run at 2933 MHz continuously?

The memory controller's maximum supported capacity and population rules for the Supermicro X12SAE or X12SCA-F board determine the practical ceiling.

How much heat do the 1.20 V CL21 sticks produce when the system runs all day?

Operating at 1.20 V without heat spreaders, the modules generate typical DDR4 UDIMM thermals; adequate chassis airflow keeps temperatures within specification.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.