Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 384GB (4 x 96GB) DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H14DSG-OD memory upgrade

SKU CH-JMHD-5YQS2

384GB kit of four 96GB DDR5 4800 CL40 2Rx4 ECC registered RDIMMs validated for the Supermicro H14DSG-OD motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Rodyti 30 daugiau konfigūracijų
  • 384 GB total capacity from four 96 GB modules for maximum server memory density
  • DDR5 4800 speed with CL40 latency matching the motherboard's rated specification
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated slots
  • 10 V operating voltage and 2Rx4 rank align with the Supermicro H14DSG-OD memory controller
  • 288-pin DDR5 RDIMM form factor fits the exact DIMM slots required by the board

Capacity and compatibility

This 384GB kit contains four 96GB DDR5 4800 CL40 ECC Registered RDIMMs built for the Supermicro H14DSG-OD motherboard. The 2Rx4 rank and 1.1V voltage match the board's memory controller so every slot is recognised at full capacity and rated speed. Server administrators who need maximum registered memory in this platform use this kit.

Upgrade path and population rules

The kit replaces any smaller-capacity RDIMM set or partially populated configuration that leaves slots empty on the H14DSG-OD. The jump is worth it when workloads demand the full 384GB at DDR5 4800 and the manual confirms the approved population order for four 2Rx4 modules. Builders using UDIMMs or SODIMMs cannot use this product.

Build integration

Each module is a 288-pin Registered DIMM without a heat spreader, so it fits the standard server DIMM sockets on the H14DSG-OD. Registered buffering offloads the memory controller, allowing all four slots to run fully populated while ECC corrects single-bit errors on the fly. Consult the motherboard manual for exact installation steps and supported capacity limits before installation.

Privalumai

  • 384 GB total capacity from four 96 GB modules for maximum server memory density
  • DDR5 4800 speed with CL40 latency matching the motherboard's rated specification
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated slots
  • 10 V operating voltage and 2Rx4 rank align with the Supermicro H14DSG-OD memory controller
  • 288-pin DDR5 RDIMM form factor fits the exact DIMM slots required by the board

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the 288-pin DDR5 RDIMM modules fit the Supermicro H14DSG-OD motherboard slots?

Yes, the 288-pin RDIMM form factor matches the slots on the Supermicro H14DSG-OD motherboard; the kit is spec-matched to the board's memory population rules for full recognition.

What is the correct installation sequence for the four 96GB modules on this board?

Consult the Supermicro H14DSG-OD manual for the approved DIMM population order; installing the 2Rx4 registered modules in the wrong slots can prevent the system from booting or recognizing the full 384GB capacity.

Does the registered ECC design reduce the need for future firmware updates or module replacement?

The registered architecture and on-die ECC correct single-bit errors in real time, improving long-term stability, but firmware updates from Supermicro may still be required for optimal compatibility and performance over the server's lifecycle.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.