Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular circuit board with gold edge connectors and black memory chips, thin SODIMM form factor

NEMIX RAM

NEMIX RAM 4GB DDR3 1066 PC3-8500 CL7 1.5V 204-PIN SODIMM Laptop RAM

SKU CH-94YW-EN78B

A 4 GB DDR3 SODIMM running at 1066 MHz with CL7 latency and 1.5 V for laptop upgrades

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCNo

Capacity 4GB

  • 4GB capacity upgrades laptop performance
  • DDR3 1066 speed matches PC3-8500 systems
  • CL7 latency supports responsive operation
  • 50V voltage fits standard DDR3 sockets
  • 204-pin SODIMM installs in compatible laptops

NEMIX RAM 4GB DDR3 1066 SODIMM

This NEMIX RAM module provides 4GB of DDR3 memory at 1066MHz with CL7 latency. It uses a 204-pin SO-DIMM form factor and operates at 1.5V. The unbuffered, non-ECC design suits standard laptop and compact system upgrades.

Suits DDR3 laptops AIO SFF NAS

This memory fits laptops, all-in-one PCs, small form factor desktops, and NAS devices that accept DDR3 1066 SO-DIMMs. It is not for systems that require ECC error correction or registered modules. It is also not for platforms limited to lower voltage memory or different pin counts.

Key spec DDR3 1066 PC3-8500 CL7

The decisive specification is the DDR3 1066 speed rating with PC3-8500 bandwidth and CL7 timing. Your system must support this exact speed and voltage combination for the module to function correctly. Verify your device documentation for DDR3 1066 compatibility before purchase.

Privalumai

  • 4GB capacity upgrades laptop performance
  • DDR3 1066 speed matches PC3-8500 systems
  • CL7 latency supports responsive operation
  • 50V voltage fits standard DDR3 sockets
  • 204-pin SODIMM installs in compatible laptops

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory
ModelDDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory
Part NumberMS8500-428K1
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible

Kiti šio modelio variantai

Dar 3 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

My laptop only has a 204-pin DDR3 slot — will this module fit and run at 1.50V without a BIOS update?

The module is a 204-pin DDR3 SODIMM rated for 1.50 V, so it fits the slot and operates at the standard voltage without requiring a BIOS change.

I am keeping my existing PC3-8500 stick — can I mix it with this CL7 module?

Mixing modules of the same speed grade (PC3-8500) and voltage (1.50 V) is generally stable; the system will run both at the lowest common CAS latency.

How can I confirm the stick is running at 1066 MT/s with CL7 timings after installation?

Open CPU-Z or a similar utility and check the SPD and Memory tabs — they should report DDR3-1066, PC3-8500 and CL7 at 1.50 V.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.