SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00494419BTC
Yra sandėlyje
NEMIX RAM
NEMIX RAM 512GB (4x128GB) DDR5 6400 CL52 2Rx4 ECC RDIMM Supermicro H13DSH memory upgrade
512 GB DDR5 server kit with four 128 GB ECC registered DIMMs running at 6400 MT/s CL52 for Supermicro H13DSH
- Capacity512GB (4 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 512 GB total capacity from four 128 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated throughput on supported platforms
- Registered ECC architecture offloads the memory controller and corrects single-bit errors
- 10 V operation matches the board's DDR5 voltage requirement for stable full-population runs
- Verified fitment for Supermicro H13DSH motherboard with 288-pin RDIMM form factor
512GB DDR5-6400 ECC RDIMM kit
This NEMIX RAM kit delivers 512GB of DDR5 memory as four 128GB registered ECC RDIMMs rated at 6400 MT/s with CL52 latency and 1.10V operation. The modules use a 2Rx4 organization and 288-pin form factor built for server platforms.
Suited for Supermicro H13DSH upgrades
The kit matches the Supermicro H13DSH motherboard's requirement for registered DDR5 RDIMMs with ECC, allowing full-capacity population across supported slots. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC memory, or a different speed grade should select another product.
Check motherboard manual before ordering
Verify the H13DSH memory population rules, maximum supported capacity per slot, and approved DIMM installation order in the system or motherboard manual. Ensure the platform firmware is current enough to initialize the full 512GB configuration at the rated DDR5-6400 speed.
Privalumai
- 512 GB total capacity from four 128 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated throughput on supported platforms
- Registered ECC architecture offloads the memory controller and corrects single-bit errors
- 10 V operation matches the board's DDR5 voltage requirement for stable full-population runs
- Verified fitment for Supermicro H13DSH motherboard with 288-pin RDIMM form factor
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K4 |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 4X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Klausimai apie šią prekę
What motherboard must I already have for this 512GB DDR5 6400 kit to be recognised at full capacity and rated speed?
The kit is verified for the Supermicro H13DSH motherboard, which expects 288-pin registered DDR5 ECC RDIMMs at 1.1V with CL52 timing.
How will these 2Rx4 registered ECC modules behave if I keep older DDR5 RDIMMs in the remaining slots?
Mixing ranks or timings can force the controller to down-clock all channels; the board manual should be consulted for approved population rules before adding these 128GB modules.
How can I confirm the 512GB kit is running at DDR5 6400 with ECC active after installation?
Check the BIOS memory information screen for 6400 MT/s speed, CL52 latency, registered mode and ECC enabled across all four 128GB modules.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 USD
0.00094585BTC
Yra sandėlyje