NEMIX RAM
NEMIX RAM 576GB 6x96GB DDR5-6400 CL52 1.1V ECC RDIMM Supermicro H13DSG-OM
Six 96 GB DDR5-6400 registered ECC modules deliver 576 GB at 1.1 V CL52 for the Supermicro H13DSG-OM motherboard
- Capacity576GB (6 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576 GB total capacity from six 96 GB modules for maximum server density
- DDR5-6400 speed with CL52 latency matched to the motherboard's rated timing
- 1 V registered ECC RDIMM architecture offloads the memory controller for full-slot stability
- 2Rx4 dual-rank organisation enables full 576 GB population on the H13DSG-OM
- Major OEM Samsung, Micron or Hynix DRAM chips ensure enterprise-grade reliability
Exact-fit server memory kit
This 576 GB kit delivers six 96 GB DDR5-6400 Registered ECC RDIMMs built for the Supermicro H13DSG-OM motherboard. Each module runs at 1.1 V with CL52 timing and a 2Rx4 rank structure the board's controller expects. The registered design offloads the controller so all slots can be populated at full capacity. ECC corrects single-bit errors on the fly to prevent silent data corruption.
Capacity and headroom
Six 96 GB modules provide 576 GB of addressable memory for large in-memory databases, virtualization hosts or HPC workloads. The DDR5-6400 (PC5-51200) data rate feeds multi-socket CPUs with high bandwidth while the registered buffer keeps signal integrity across a fully populated chassis. Headroom ends at the motherboard's maximum supported capacity and its qualified DIMM population rules.
Build integration
The 288-pin RDIMM form factor fits only boards wired for registered DDR5; it will not seat in UDIMM or SODIMM slots. No heat spreader is fitted, so airflow across the modules must come from the chassis fans. Verify the H13DSG-OM manual for approved slot order, maximum capacity per channel and any BIOS revision requirements before installation.
Privalumai
- 576 GB total capacity from six 96 GB modules for maximum server density
- DDR5-6400 speed with CL52 latency matched to the motherboard's rated timing
- 1 V registered ECC RDIMM architecture offloads the memory controller for full-slot stability
- 2Rx4 dual-rank organisation enables full 576 GB population on the H13DSG-OM
- Major OEM Samsung, Micron or Hynix DRAM chips ensure enterprise-grade reliability
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Klausimai apie šią prekę
Will the 6400 MHz DDR5 RDIMMs run at rated speed when I add them to the Supermicro H13DSG-OM board I already have?
The kit is spec-matched to the H13DSG-OM memory controller, so all six 96 GB modules are recognised at full capacity and operate at DDR5-6400 with CL52 timing.
How can I confirm the ECC registered memory is active after installation?
Check the BIOS memory information screen — it should show 576 GB total, ECC enabled and a registered DIMM type for each populated slot.
What comes in the box and do I need any extra parts?
The package contains the six 96 GB DDR5-6400 CL52 1.1 V ECC RDIMMs only; no heat spreaders or additional cables are included.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 USD
0.0013317BTC
Yra sandėlyje
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 USD
0.00010135BTC
Yra sandėlyje