Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 CL15 1.2V 2Rx8 260-pin SODIMM for POSIFLEX RT-5016Q memory upgrade

SKU CH-CTE6-VHKQG

8 GB DDR4 2133 CL15 SODIMM module built for the POSIFLEX RT-5016Q terminal

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands terminal multitasking headroom
  • DDR4 2133 speed matches POSIFLEX RT-5016Q spec
  • 20 V low-voltage operation reduces power draw
  • 2Rx8 dual-rank layout optimises memory density
  • 260-pin SODIMM form factor fits terminal slot

POSIFLEX RT-5016Q terminal memory upgrade

This 8GB DDR4 SODIMM is built specifically for the POSIFLEX RT-5016Q point-of-sale terminal. It delivers 2133MHz speed at CL15 latency using standard 1.20V power. The module uses major OEM chips from Samsung Micron or Hynix and carries a 2Rx8 rank configuration.

Sustained workload behaviour for POS terminals

The unbuffered non-ECC design handles continuous transaction processing without registered-buffer overhead. Modules are stress tested under load to verify stability during extended retail or hospitality shifts. The 1.2V operation keeps thermals manageable inside compact terminal chassis where airflow is limited.

Compatibility checks before ordering

Verify your RT-5016Q accepts 260-pin DDR4 SODIMMs and supports PC4-17000 speed at CL15 timing. Confirm the motherboard has a free slot for a single 8GB 2Rx8 module. This memory is not for systems requiring ECC registered DIMMs or a different pin count or voltage.

Privalumai

  • 8 GB capacity expands terminal multitasking headroom
  • DDR4 2133 speed matches POSIFLEX RT-5016Q spec
  • 20 V low-voltage operation reduces power draw
  • 2Rx8 dual-rank layout optimises memory density
  • 260-pin SODIMM form factor fits terminal slot

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM

Klausimai apie šią prekę

How much power does this DDR4 2133 module draw when the terminal runs continuously?

The module operates at 1.20V, the standard DDR4 voltage, so power draw stays low even under sustained load.

What must the POSIFLEX RT-5016Q already have for this SODIMM to work?

The system needs a free 260-pin DDR4 SODIMM slot and a BIOS that accepts 2133 MT/s non-ECC unbuffered memory.

Will this 2Rx8 stick run alongside the original memory in my RT-5016Q?

Yes, it is built to JEDEC DDR4 2133 CL15 specs, so it will match the terminal's existing modules at the same speed and timings.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.