SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00502075BTC
Yra sandėlyje
NEMIX RAM
NEMIX RAM 8GB DDR4 2400 CL17 1Rx8 1.2V 288-pin UDIMM memory upgrade
8GB DDR4 2400 CL17 1.2V UDIMM for Samsung desktops, unbuffered non-ECC upgrade
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB capacity adds responsive multitasking headroom
- DDR4 2400 speed matches PC4-19200 bandwidth rating
- CL17 CAS latency keeps access delays low
- 2V operation reduces power draw and heat
- 288-pin UDIMM form factor fits standard desktop slots
Samsung Desktop Compatible DDR4 Module
This 8GB DDR4 UDIMM is built for Samsung desktop systems requiring PC4-19200 speed. It uses a single-rank 1Rx8 layout with major OEM chips from Samsung, Micron or Hynix. The module is unbuffered and non-ECC, matching standard consumer motherboard requirements. Buyers needing registered or ECC memory for server platforms cannot use this product.
Sustained Load Behaviour
Stress-tested under load, the module maintains stable operation at 2400MHz with CL17 latency and 1.20V voltage. The absence of a heat spreader means thermal performance relies on case airflow during prolonged workloads. Systems running continuous memory-intensive tasks should ensure adequate ventilation. Modules requiring active cooling or higher voltage tolerances fall outside this design.
Installation Notes
The 288-pin DDR4 form factor fits standard desktop UDIMM slots without tools. Alignment notches prevent incorrect insertion, and the low 1.2V profile reduces seating force. Compatibility is validated for Samsung platforms; other brands may require manual BIOS configuration. Builders using proprietary OEM motherboards with locked memory profiles should verify support before purchase.
Privalumai
- 8GB capacity adds responsive multitasking headroom
- DDR4 2400 speed matches PC4-19200 bandwidth rating
- CL17 CAS latency keeps access delays low
- 2V operation reduces power draw and heat
- 288-pin UDIMM form factor fits standard desktop slots
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | Samsung Desktop PC Compatible Series Memory |
| Model | Samsung DDR4 2666MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD19200-818K1 |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Samsung |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2400MHZ PC4-19200 1Rx8 1.2V CL17 288-PIN Non-ECC Unbuffered UDIMM |
Klausimai apie šią prekę
How much heat or power does this 1.2 V DDR4 module draw when it runs continuously?
The module operates at 1.2 V with no heat spreader, so it produces minimal heat and draws standard DDR4 power for an 8 GB stick.
What motherboard slot and CPU memory controller must I already have for this 288-pin UDIMM to work?
You need a desktop board with a DDR4 288-pin UDIMM slot and a CPU or chipset that supports DDR4 2400 or 2666 speeds.
Will this CL17 2400 MHz stick run stably alongside my existing 2666 MHz Samsung modules?
Yes, the system will clock both kits down to the lowest common speed and latency, so the 2400 CL17 module works with faster Samsung DDR4.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 USD
0.0009605BTC
Yra sandėlyje