Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board with black chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 ECC SODIMM 1.2V CL17

SKU CH-A91H-XMB3T

8GB DDR4 2400 ECC SODIMM module with CL17 latency and 1.2V operation for laptops, AIO, SFF and NAS devices

  • Capacity8GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • ECC protection prevents data corruption in critical workloads
  • DDR4 2400 speed handles demanding multitasking smoothly
  • Low 1.20V voltage reduces power draw and heat
  • 260-pin SODIMM fits laptops AIO SFF NAS devices
  • CL17 latency ensures responsive system performance

ECC SODIMM for laptops and NAS

This NEMIX RAM module provides 8 GB of DDR4 2400 memory with ECC error correction for data integrity. It targets IT professionals upgrading laptops, all-in-one PCs, small-form-factor systems or NAS devices that require unbuffered ECC memory. The single 260-pin stick installs in a standard SODIMM slot to increase capacity for mission-critical workloads.

Low-voltage operation at 1.2 V

The module runs at 1.20 V with CL17 latency, keeping power draw and heat minimal inside compact chassis. No heat spreader is fitted, so the bare PCB relies on system airflow for cooling. Unbuffered ECC operation adds reliability without the extra power overhead of registered designs, making it suitable for fanless or thermally constrained enclosures.

Fits 260-pin DDR4 SODIMM slots

The stick requires a compatible DDR4 SODIMM socket and a platform that supports unbuffered ECC memory at 2400 MT/s. It frees an additional slot for a second module when the board offers two banks. Builders must verify that the host system enables ECC in firmware, as non-ECC platforms will not utilise the error-correction capability.

Privalumai

  • ECC protection prevents data corruption in critical workloads
  • DDR4 2400 speed handles demanding multitasking smoothly
  • Low 1.20V voltage reduces power draw and heat
  • 260-pin SODIMM fits laptops AIO SFF NAS devices
  • CL17 latency ensures responsive system performance

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Series 260-Pin ECC Unbuffered SODIMM Memory
ModelDDR4 ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory
Part NumberMSE19200-828K1
Capacity8GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible

Klausimai apie šią prekę

How do I install this 260-pin DDR4 SODIMM and what step is often missed?

Align the notch on the 260-pin module with the slot key, insert at a slight angle, then press down firmly until both side clips click — the step people miss is fully seating the module before the clips engage.

What maintenance or replacement will this ECC SODIMM need over time?

No routine maintenance is required; the module has no heat spreader and runs at 1.20 V, so replacement is only needed if a memory error appears or capacity must be increased.

What limit appears first during sustained workloads on this CL17 2400 MHz module?

The CAS latency of 17 at DDR4 2400 sets the timing ceiling; under continuous load the memory controller will hit this latency bound before thermal throttling becomes a factor.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.