Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular DDR4 RDIMM module with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 2933 ECC RDIMM CL21 memory upgrade

SKU CH-EJXM-PJ2R2

An 8 GB DDR4-2933 ECC registered DIMM with CL21 latency and 1.2 V operation for compatible Micron servers

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data errors in servers
  • Registered design stabilises heavy workloads on motherboards
  • DDR4 2933 speed handles demanding applications
  • 2 V operation reduces power draw
  • 288-pin RDIMM fits compatible Micron systems

Server-grade ECC RDIMM for Micron systems

This 8 GB DDR4-2933 registered module carries ECC and a CL21 latency at 1.20 V. It is built for Micron-branded server and workstation boards that require registered DIMMs. The single-rank 1Rx8 organisation fits the MTA9ASF1G72PZ-2G9 specification.

288-pin registered design with no heat spreader

The bare PCB slides into standard DDR4 RDIMM slots and draws 1.20 V without extra clearance for a spreader. Registered signalling reduces electrical load on the memory controller, supporting stable operation in multi-module configurations. No additional cooling hardware is needed.

Replaces non-ECC or slower registered DIMMs

Upgrading from unbuffered non-ECC memory adds error correction for data integrity in critical workloads. Moving from lower-speed DDR4 RDIMMs raises bandwidth to PC4-23400. The jump is worth it when the platform demands registered ECC modules and the current population limits capacity or speed.

Privalumai

  • ECC protection prevents data errors in servers
  • Registered design stabilises heavy workloads on motherboards
  • DDR4 2933 speed handles demanding applications
  • 2 V operation reduces power draw
  • 288-pin RDIMM fits compatible Micron systems

Specifikacijos

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-818K1
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMICRON
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Klausimai apie šią prekę

What does the DDR4 2933 PC4-23400 rating mean for real-world throughput?

The module runs at 2933 MT/s with a peak bandwidth of PC4-23400; actual throughput depends on the server memory controller and channel population.

Will this 288-pin 1Rx8 RDIMM fit my Micron-compatible server board?

It uses the standard 288-pin DDR4 RDIMM form factor and 1Rx8 organisation, matching Micron MTA9ASF1G72PZ-2G9 specifications for registered DIMM slots.

How do I install this ECC registered module, and what step is often missed?

Power down, open the chassis, align the notch on the 288-pin edge connector, press firmly until the retention clips lock, then verify in BIOS that ECC and registered mode are enabled.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.