Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board SODIMM module with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 SODIMM memory upgrade POSIFLEX EK-2432

SKU CH-ETCE-WECCE

8GB DDR4 3200 SODIMM upgrade for POSIFLEX EK-2432 kiosks, CL22 1.2V unbuffered non-ECC

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity adds headroom for kiosk workloads
  • DDR4 3200 speed matches system bus for stable throughput
  • CL22 latency keeps timing consistent under load
  • 2 V operation reduces heat in enclosed cabinets
  • 260-pin SODIMM form factor fits POSIFLEX EK-2432 slot exactly

System-Specific SODIMM for POSIFLEX EK-2432

This NEMIX RAM module is an 8 GB DDR4 3200 SODIMM built for the POSIFLEX EK-2432 Mercury Series kiosk. It targets technicians and IT teams who need a direct, tested replacement for point-of-sale hardware. The unbuffered, non-ECC design matches the original system specification.

DDR4 3200 PC4-25600 CL22 1.20 V 2Rx8

The single spec that decides fit is the DDR4 3200 PC4-25600 rating with CL22 latency at 1.20 V in a 2Rx8 organisation. The 260-pin SODIMM keying and voltage must match the kiosk's memory controller exactly; a different speed grade or pin count will not seat or boot.

Drops into the kiosk slot, no extra parts

Installation uses the existing SODIMM socket inside the POSIFLEX chassis; no heat spreader, adapter, or cable is required. The module frees the single upgrade slot for maximum capacity within the platform limit. Builders needing ECC, registered signalling, or a second stick for dual-channel must select a different system.

Privalumai

  • 8 GB capacity adds headroom for kiosk workloads
  • DDR4 3200 speed matches system bus for stable throughput
  • CL22 latency keeps timing consistent under load
  • 2 V operation reduces heat in enclosed cabinets
  • 260-pin SODIMM form factor fits POSIFLEX EK-2432 slot exactly

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Klausimai apie šią prekę

Will the CL22 latency feel slow once the module is running inside the POSIFLEX EK-2432?

CL22 is the standard timing for 3200 MHz DDR4 SODIMMs and the kiosk's memory controller is tuned for this latency, so everyday POS tasks run at the expected speed.

Does the PC4-25600 rating limit the actual throughput in this system?

PC4-25600 equals 3200 MT/s; the POSIFLEX EK-2432 memory bus tops out at that rate, so the module delivers the full rated bandwidth.

Will the 260-pin SODIMM fit the memory slot on the EK-2432 motherboard?

Yes, the 260-pin DDR4 SODIMM form factor matches the SO-DIMM socket used in the POSIFLEX EK-2432 Mercury Series kiosk.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.