SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00502629BTC
Yra sandėlyje
NEMIX RAM
NEMIX RAM CSE-E101-04 8GB DDR5 4800 CL40 1.1V 262-pin SODIMM memory upgrade
8GB DDR5 4800 CL40 SODIMM for Supermicro SYS-E100-13AD-E and X13SAN-E systems
- Capacity8GB
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 8 GB capacity adds responsive multitasking headroom
- DDR5 4800 MT/s speed accelerates data throughput
- CL40 latency supports stable system operation
- 10 V voltage reduces platform power draw
- 262-pin SODIMM form factor fits Supermicro IoT SuperServer SYS-E100-13AD-E
SuperMicro E101 compatible DDR5 SODIMM
This 8 GB DDR5 module is built for the SuperMicro IoT SuperServer SYS-E100-13AD-E and the X13SAN-E motherboard family. It targets administrators who need a single, validated upgrade for those specific platforms rather than a generic laptop stick. The unbuffered, non-ECC design matches the server's native memory topology.
4800 MT/s CL40 at 1.10 V
The decisive specification is the JEDEC-standard DDR5-4800 speed grade with CL40 latency operating at 1.10 volts. Any module that deviates from this exact speed, voltage or timing will not be recognised by the SuperMicro firmware, so this part number is the only safe match for the listed systems.
Steady throughput under continuous server workloads
All modules are stress-tested under sustained load before shipping, confirming stability during extended compute tasks such as virtualization hosting or database caching. The single-rank 1Rx8 organisation and major-brand DRAM chips deliver consistent bandwidth without throttling when the system runs at full utilisation for hours.
Privalumai
- 8 GB capacity adds responsive multitasking headroom
- DDR5 4800 MT/s speed accelerates data throughput
- CL40 latency supports stable system operation
- 10 V voltage reduces platform power draw
- 262-pin SODIMM form factor fits Supermicro IoT SuperServer SYS-E100-13AD-E
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-818K1 |
| Capacity | 8GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 262-PIN Non-ECC Unbuffered SODIMM |
Klausimai apie šią prekę
How does the 4800 MT/s speed translate once the module is installed in a SuperMicro IoT SuperServer SYS-E100-13AD-E?
The module runs at DDR5 4800 (PC5-38400) with CL40 latency at 1.10 V, delivering the rated throughput provided the platform's memory controller supports that data rate.
What does the 262-pin DDR5 SODIMM interface cap in practice?
The 262-pin DDR5 SODIMM form factor limits the module to a single 1Rx8 rank at 4800 MT/s, non-ECC and unbuffered, so maximum capacity per slot is 8 GB.
What physical clearance does the module need to fit in the SYS-E100-13AD-E?
It uses a standard 262-pin DDR5 SODIMM PCB without a heat spreader, so it fits the factory SODIMM slots in the SuperMicro IoT SuperServer SYS-E100-13AD-E without extra height clearance.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 USD
0.00096156BTC
Yra sandėlyje