NEMIX RAM
NEMIX RAM DDR5 384GB (4x96GB) 6400 CL52 1.1V ECC RDIMM 2Rx4 SuperMicro AS-2116GT-HNTF
A 384 GB DDR5 registered ECC kit of four 96 GB modules running at 6400 MHz with CL52 latency at 1.1 V, validated for the SuperMicro GrandTwin AS-2116GT-HNTF server
- Capacity384GB (4 x 96GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- Massive 384GB capacity handles heavy server workloads
- DDR5 6400MHz speed accelerates data-intensive applications
- ECC registered design prevents data corruption in critical systems
- Low 1.1V operation reduces power draw per module
- Validated for SuperMicro AS-2116GT-HNTF GrandTwin A+ Server
System-Specific 384GB DDR5 Kit
This 384GB kit contains four 96GB DDR5 registered DIMMs validated for the SuperMicro GrandTwin A+ Server AS-2116GT-HNTF. Each module runs at 6400MHz with CL52 latency at 1.1V. The ECC RDIMM design targets enterprise workloads that require registered memory with error correction. Builders needing unbuffered UDIMMs or non-ECC memory for consumer platforms cannot use this kit.
Upgrade From Lower-Capacity RDIMMs
Replacing smaller RDIMM sets with this 4x96GB configuration increases total system memory without adding modules beyond the four included. The jump is worth it when virtualization density, in-memory databases or large dataset processing exceed the capacity of existing registered memory. Systems limited to fewer DIMM slots or lower maximum registered capacity will not accept the full kit.
Sustained Load Behaviour
Registered buffering and on-die ECC maintain data integrity during continuous server operation at the rated 6400MHz speed. The 1.1V operating voltage supports stable throughput under prolonged multi-threaded workloads typical of the target GrandTwin platform. Workloads that exceed the thermal or power envelope of the specific chassis may throttle regardless of module specifications.
Privalumai
- Massive 384GB capacity handles heavy server workloads
- DDR5 6400MHz speed accelerates data-intensive applications
- ECC registered design prevents data corruption in critical systems
- Low 1.1V operation reduces power draw per module
- Validated for SuperMicro AS-2116GT-HNTF GrandTwin A+ Server
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB (4 x 96GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Klausimai apie šią prekę
Does this kit fit the 288-pin DDR5 RDIMM slots in the SuperMicro GrandTwin A+ Server AS-2116GT-HNTF?
Yes, each of the four 96 GB modules is a 288-pin DDR5 RDIMM built for that platform.
What is the correct order for seating the four modules in the server?
Follow the motherboard manual; the usual mistake is skipping the primary channel slot and leaving it empty.
When should the 2Rx4 ECC RDIMMs be replaced if correctable error counts start rising?
Replace the affected module once the platform logs show a sustained increase in corrected ECC events.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



