Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 64GB kit

NEMIX RAM

NEMIX RAM DDR5 6400 64GB (2x32GB) CL52 1.1V 2Rx4 ECC RDIMM Supermicro X14SDW-64CM-SP9F memory upgrade

SKU CH-PPNC-8V8TC

A 64 GB DDR5 6400 registered ECC kit in a 2×32 GB layout, CL52 at 1.1 V, built for the Supermicro X14SDW-64CM-SP9F

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Rodyti 4 daugiau konfigūracijų
  • 64 GB capacity in a matched 2 × 32 GB kit for full server density
  • DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 2Rx4 288-pin RDIMM form factor matches the Supermicro X14SDW-64CM-SP9F slot requirements
  • Built with major OEM chips from Samsung, Micron or Hynix for enterprise stability

Targeted Server Upgrade

This 64GB kit provides two 32GB DDR5 RDIMMs rated at 6400MHz PC5-51200 with CL52 latency and 1.1V operation. It is built specifically for the Supermicro X14SDW-64CM-SP9F motherboard, matching the exact rank, voltage and timing the board's memory controller expects for full-capacity recognition at rated speed.

Registered ECC Form Factor

Each module uses a 288-pin registered DIMM design with 2Rx4 organisation and on-die ECC, delivering the buffered architecture this platform requires for stable fully-populated operation. The registered interface reduces electrical load on the memory controller, while error correction catches and corrects single-bit faults before they affect production workloads.

Enterprise Thermal Profile

Operating at the standard 1.1V DDR5 voltage without a heat spreader, these modules rely on the server chassis airflow for cooling. The registered design and ECC functionality maintain data integrity under sustained load, supporting continuous operation in environments where unplanned reboots or silent data corruption are unacceptable.

Privalumai

  • 64 GB capacity in a matched 2 × 32 GB kit for full server density
  • DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 2Rx4 288-pin RDIMM form factor matches the Supermicro X14SDW-64CM-SP9F slot requirements
  • Built with major OEM chips from Samsung, Micron or Hynix for enterprise stability

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does this DDR5-6400 kit run at its rated 6400 MT/s on the Supermicro X14SDW-64CM-SP9F?

Yes, the kit is spec-matched to the board's memory controller so it is recognised at full capacity and operates at DDR5-6400 (PC5-51200) with CL52 timing at 1.1 V.

Will these 288-pin RDIMMs physically fit the Supermicro X14SDW-64CM-SP9F slots?

The board requires 288-pin registered RDIMMs; this kit uses that exact form factor — not UDIMM or SODIMM — so the modules seat correctly in the server's DIMM slots.

What population order should I follow when installing the two 32 GB modules?

Install the DIMMs in the sequence specified by the Supermicro X14SDW-64CM-SP9F manual — typically filling the primary channel slots first — then enable ECC in the BIOS to activate registered ECC operation.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.