NEMIX RAM
NEMIX RAM DDR5-6400 ECC Registered RDIMM 128GB (4×32GB) CL52 1.1V 2Rx8 Supermicro H14SST-GE memory upgrade
A 128 GB DDR5 ECC registered RDIMM kit (4 × 32 GB) running at 6400 MT/s with CL52 latency and 1.1 V, built for the Supermicro H14SST-GE motherboard
- Capacity128GB (4 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 128 GB total capacity from four 32 GB modules
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects single-bit errors automatically
- 2Rx8 dual-rank layout enables full population on supported boards
- 288-pin RDIMM form factor matches Supermicro H14SST-GE requirements
Supermicro H14SST-GE DDR5 upgrade kit
This 128 GB kit contains four 32 GB DDR5-6400 registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H14SST-GE motherboard expects. It targets administrators who need full-capacity, error-correcting memory for production servers and virtualization hosts.
Replacing slower or smaller RDIMMs
The jump is worth it when current modules run below 6400 MT/s, total capacity is under 128 GB, or unbuffered DIMMs are installed in a board that requires registered parts. Registered architecture offloads the memory controller so every slot stays stable at full population.
288-pin RDIMM form factor fits the board's memory
The kit needs a compatible Supermicro H14SST-GE platform with correct DIMM population order documented in the system manual. It frees the builder from mixing ranks or voltages and delivers ECC protection against silent data corruption.
Privalumai
- 128 GB total capacity from four 32 GB modules
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects single-bit errors automatically
- 2Rx8 dual-rank layout enables full population on supported boards
- 288-pin RDIMM form factor matches Supermicro H14SST-GE requirements
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 4X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Klausimai apie šią prekę
Does the 288-pin DDR5 RDIMM form factor match the Supermicro H14SST-GE memory slots?
Yes, the kit uses the 288-pin Registered DDR5 RDIMM form factor that the H14SST-GE requires; it is not a UDIMM or SODIMM.
What is the correct population order for the four 32 GB modules on the H14SST-GE?
Install the four 2Rx8 modules in the exact slot sequence shown in the Supermicro H14SST-GE manual so the memory controller recognises the full 128 GB at DDR5-6400.
Will the registered ECC modules need any firmware updates or battery replacements over time?
No firmware updates or batteries are required; the DDR5 RDIMMs rely on on-die ECC and registered buffering for error correction and stability throughout their service life.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



