Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Six green DDR5 RDIMM modules with black chips and no heat spreader

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 288GB 6x48GB 4800 CL40 1.1V Supermicro H14SSF

SKU CH-FN4S-TMMPM

A 288 GB registered ECC DDR5 kit of six 48 GB modules running at 4800 MHz CL40 and 1.1 V, validated for the Supermicro H14SSF motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Rodyti 24 daugiau konfigūracijų
  • 288 GB total capacity with six 48 GB modules for maximum server density
  • DDR5 4800 speed delivers 38400 MB/s bandwidth for data-intensive workloads
  • Registered ECC design with CL40 latency corrects errors and stabilises fully populated channels
  • 1 V operation reduces power draw across all 288 GB of memory
  • Verified compatibility with Supermicro H14SSF motherboard ensures correct fit and recognition

Exact-fit DDR5 ECC RDIMM kit for Supermicro H14SSF

This 288 GB kit contains six 48 GB DDR5 4800 CL40 registered ECC modules built to the voltage and timing the H14SSF memory controller expects. It targets administrators who need maximum supported capacity in every slot without manual tuning.

Upgrade from partial or mixed-capacity populations

When the board currently runs fewer than six DIMMs or a blend of ranks this kit replaces them with a validated 2Rx8 set so the controller sees a uniform layout at full speed. The jump is worth it when workloads demand the full 288 GB address space and registered buffering is required for stability.

Straightforward installation

Modules seat in the standard 288-pin RDIMM slots; the critical step is following the motherboard manual for population order and supported capacity per channel. What usually goes wrong is skipping that check and populating slots the firmware does not recognise, which leaves capacity unseen or the system unbootable.

Privalumai

  • 288 GB total capacity with six 48 GB modules for maximum server density
  • DDR5 4800 speed delivers 38400 MB/s bandwidth for data-intensive workloads
  • Registered ECC design with CL40 latency corrects errors and stabilises fully populated channels
  • 1 V operation reduces power draw across all 288 GB of memory
  • Verified compatibility with Supermicro H14SSF motherboard ensures correct fit and recognition

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will this 288-pin RDIMM kit fit the DIMM slots on my Supermicro H14SSF motherboard?

Yes, the kit uses the 288-pin DDR5 RDIMM form factor that the H14SSF requires; it is not a UDIMM or SODIMM and matches the board's registered memory specification.

What is the correct installation order for the six 48 GB modules on the H14SSF?

Populate the slots in the sequence listed in the Supermicro H14SSF manual; the board's population rules dictate which channels fill first for full 288 GB recognition at DDR5-4800.

Do these registered ECC modules need any firmware updates or periodic replacement?

No firmware updates are required for the memory itself; ECC corrects single-bit errors automatically, and the modules carry a lifetime replacement warranty if a hardware fault ever occurs.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.