NZXT
NZXT F140P 140mm White Static Pressure PWM Case Fan
A 140 mm white case fan with fluid dynamic bearing, 500–1700 RPM, 93.2 CFM airflow, 4.45 mm H2O static pressure and 30 dBA noise
- Fan Counts1 Fan
- TypeCase Fan
- CompatibilityCase
- Fan Size140mm
- Fan Thickness25mm
- Bearing TypeFluid Dynamic Bearing
- Optimised blades push 93.2 CFM through radiators
- 45 mm H₂O pressure overcomes dense fin stacks
- Fluid dynamic bearing runs at 30 dBA max
- PWM control spans 500 to 1700 RPM ± 200
- White 140 mm frame fits standard case mounts
140 mm Static Pressure PWM Fan
This 140 mm white case fan uses a fluid dynamic bearing and a 4-pin PWM connector to deliver targeted airflow for radiators and dense heatsinks. The non-LED design keeps the interior clean while the speed range runs from 500 to 1700 RPM with a tolerance of 200 RPM.
Build Quality and Mounting
A chamfered frame and optimised blade profile reduce turbulence when the fan is mounted against restrictive surfaces. The 25 mm thickness fits standard 140 mm mounting points and the white finish matches light-themed builds without adding illumination.
Thermals Noise and Power
At full speed the fan moves 93.2 CFM while generating 4.45 mm H2O of static pressure and a noise level of 30 dBA. PWM control lets the system lower speed for quieter idle operation while still providing strong cooling when components are under load.
Privalumai
- Optimised blades push 93.2 CFM through radiators
- 45 mm H₂O pressure overcomes dense fin stacks
- Fluid dynamic bearing runs at 30 dBA max
- PWM control spans 500 to 1700 RPM ± 200
- White 140 mm frame fits standard case mounts
Specifikacijos
| Brand | NZXT |
|---|---|
| Model | F140P |
| Part Number | RF-P14SF-W2 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Fluid Dynamic Bearing |
| RPM | 500 - 1700 +/- 200 RPM |
| Air Flow | 93.2 CFM |
| Air Pressure | 4.45 mm H2O |
| Noise Level | 30 dBA |
| Power Connector | 4-pin PWM |
| Color | White |
| LED | Non-LED |
| Dimensions | 140 x 140 x 25 mm |
Klausimai apie šią prekę
What does the 4-pin PWM connector allow the fan to do?
The 4-pin PWM connector enables the motherboard to vary the fan speed precisely between 500 and 1700 RPM with a tolerance of 200 RPM.
Will this 140mm fan fit in my case or radiator?
The frame measures 140 by 140 mm with a 25 mm thickness, so it fits any standard 140 mm mounting pattern.
How do I install the fan and which way should the airflow go?
Screw the fan into the four corner holes using the supplied screws; orient it so air moves from the open side toward the motor side for static pressure.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001049BTC
Yra sandėlyje