Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 92mm square frame fan with 3-pin connector

OEM Industries

OEM Industries 3610KL-04W-B59 92mm 3-Pin Ball Bearing Fan

SKU CH-JMAC-R9AM4

92 mm ball-bearing case fan runs at 12 V, 0.43 A with a three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size92mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 92 mm square frame fits tight server bays
  • Ball bearing motor extends continuous-run life
  • 12 V .43 A draw keeps power budget low
  • Three-pin connector enables motherboard speed control
  • Black finish blends into dark chassis builds

92 mm Ball-Bearing Server Fan

The OEM Industries 3610KL-04W-B59 is a 92 mm square fan built for CPU and server cooling. It runs on 12 V at 0.43 A through a standard three-pin connector. The ball-bearing design targets continuous operation in rack or workstation chassis. Black frame and blades suit professional builds.

Replaces Worn Three-Pin Coolers

Swap this unit in when an existing 92 mm three-pin fan fails or grows noisy after long service. The 12 V 0.43 A rating matches many OEM server headers, so the upgrade is worthwhile when the original bearing wears out. Keep the same mounting holes and voltage rail without rewiring. It is not for builders who need PWM speed control or larger airflow volumes.

Limits Of The Three-Pin Interface

Voltage regulation on a three-pin header sets the speed range, so fine-grained curves are not available. The 92 mm by 25 mm frame fits standard square mounts but cannot cover larger heatsink surfaces. Ball bearings tolerate heat better than sleeve types, yet they still produce audible noise at full voltage. No LED or sensor feedback is included.

Privalumai

  • 92 mm square frame fits tight server bays
  • Ball bearing motor extends continuous-run life
  • 12 V .43 A draw keeps power budget low
  • Three-pin connector enables motherboard speed control
  • Black finish blends into dark chassis builds

Specifikacijos

Model3610KL-04W-B59
ColorBlack
TypeFan only
Fan Size92mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Klausimai apie šią prekę

Will the 92mm square frame with 25mm thickness fit my server chassis?

The fan measures 92mm square and 25mm thick, so verify your chassis has a 92mm mounting pattern and at least 25mm clearance.

How do I connect the 3-pin 12V 0.43A power lead to the motherboard header?

Align the three-pin connector with the 12V fan header on the board; the keyed plug prevents reverse insertion.

When should I plan to replace the ball-bearing fan?

Ball bearings typically run for years; replace the unit if noise increases or airflow drops noticeably.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.