Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 50mm blower fan, 20mm thick, three-pin connector

OEM Industries

OEM Industries AB5012HB-C03 50mm 3-pin blower fan

SKU CH-MNK7-VRPVG

A 50 mm blower fan with ball bearing and 3-pin connector runs at 12 V and 0.21 A for compact centrifugal cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact blower design directs airflow through tight spaces
  • Ball bearing ensures long service life
  • 12 V 0.21 A power draw keeps energy use low
  • Three-pin connector provides simple speed control
  • 50 mm by 20 mm frame fits small form-factor builds

Compact blower for tight builds

The OEM Industries AB5012HB-C03 is a 50mm centrifugal blower designed for confined chassis where axial airflow cannot reach the heatsink. It suits small-form-factor PCs, industrial appliances and projector units that demand directed exhaust through a narrow duct.

Sustained operation with ball bearing

Ball-bearing construction keeps rotational stability consistent during continuous duty cycles rather than only at startup. The 12V 0.21A draw remains steady so thermal output does not drift when the load persists for hours.

Verify voltage and header before fitting

Confirm the target device supplies 12V on a three-pin header and that the 50x20mm footprint clears surrounding components. The three-wire lead provides tach feedback but no PWM control, so speed regulation depends on the host voltage. Buyers needing PWM or a larger frame should look elsewhere.

Privalumai

  • Compact blower design directs airflow through tight spaces
  • Ball bearing ensures long service life
  • 12 V 0.21 A power draw keeps energy use low
  • Three-pin connector provides simple speed control
  • 50 mm by 20 mm frame fits small form-factor builds

Specifikacijos

ModelAB5012HB-C03
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Klausimai apie šią prekę

How much noise and heat does the 50mm ball-bearing blower produce when running continuously at 12V 0.21A?

The fan draws 0.21 A at 12 V through its 3-pin connector and uses a ball bearing, so sustained operation stays within that electrical envelope without extra friction heat.

What motherboard header or controller do I need to connect the 3-pin power connector?

A standard 3-pin fan header supplying 12 V is required; the lead has three wires for power, ground and tachometer signal.

Will the 50x20mm centrifugal blower fit in the same mounting holes as my older 50mm axial fan?

The blower measures 50 mm square by 20 mm thick, so it only fits brackets designed for that exact footprint and blower-style airflow direction.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.