OEM Industries
OEM Industries AF12025 120mm Fan 12V 0.15A 1500RPM
120 mm case fan spins at 1500 RPM on 12 V power for SilentiumT5 cooling
- ColorBlack
- TypeFan only
- Fan Size120mm
- Power Connector2 Wires
- LEDNo
- 120 mm fan fits standard case mounts
- 12 V 0.15 A draws minimal power
- 1500 RPM provides steady airflow
- Two-wire connector simplifies installation
- Black frame suits dark-themed builds
OEM AF12025 120mm Fan
The OEM Industries AF12025 is a 120mm case fan designed for 12V operation at 0.15A. It spins at 1500RPM and uses a two-wire power connector without LED lighting. This black fan suits builders replacing a worn unit in a compact chassis or upgrading a stock cooler for quieter airflow.
Replaces stock or aged 120mm fans
Swap this in when an original two-wire fan becomes noisy, fails, or cannot move enough air through a tight heatsink. The jump is worth it if the existing mount accepts 120mm spacing and the header supplies 12V without PWM control. It does not serve builds that require four-pin speed regulation or addressable lighting.
Fits 120mm mounts with two-wire headers
Installation needs a standard 120mm screw pattern and a 12V two-pin header on the board or fan controller. The low 0.15A draw leaves headroom on shared fan headers for additional cooling devices. It frees up a four-pin header for PWM components while delivering steady airflow to the CPU heatsink or case exhaust.
Privalumai
- 120 mm fan fits standard case mounts
- 12 V 0.15 A draws minimal power
- 1500 RPM provides steady airflow
- Two-wire connector simplifies installation
- Black frame suits dark-themed builds
Specifikacijos
| Model | AF12025 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 120mm |
| Power Connector | 2 Wires |
| LED | No |
Klausimai apie šią prekę
Does the 120mm AF12025 fit the standard mounting holes of a 120mm case or radiator slot?
Yes, the 120mm frame matches the standard four-hole pattern used on 120mm case vents and radiators.
How do I connect the 2-wire lead to a 12V motherboard header, and what mistake should I avoid?
Plug the 2-wire connector onto the 12V DC header observing polarity; the common error is reversing the wires, which prevents the fan from spinning.
When should I plan to replace the AF12025 fan in my SilentiumT5 build?
Replace the fan when bearing noise appears or airflow drops noticeably; at 1500RPM typical sleeve-bearing life is several years of continuous use.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Thermal Grizzly TG-MP8-120-20-30-1R Minus Pad 8 chipset cooling 120x20x3.0mm
DOCTOR METAL 3x 120mm case fan pack white with controller
- Case Fan
- Case
DOCTOR METAL 120 mm case fan 3-pack with controller
- Case Fan
- Case



