Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black square 70mm CPU fan with 4-pin connector

OEM Industries

OEM Industries DE07015R12U P056 70x15mm 12V .7A 4 Pin CPU Cooler

SKU CH-FXQE-8751T

A 70 mm square fan with hydro bearing runs at 12 V and .7 A through a 4‑pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeHydro
  • Power Connector4 Pin
  • LEDNo
  • 70 mm fan fits tight CPU cooler spaces
  • Hydro bearing reduces friction for quieter long-term operation
  • 4-pin connector enables precise PWM speed control
  • 12 V .7 A rating keeps power draw low
  • 15 mm slim profile suits low-profile and small-form-factor builds

70mm Square CPU Cooler

The OEM Industries DE07015R12U P056 is a 70mm square fan unit designed for compact CPU cooling. It suits builders working with small-form-factor cases or low-profile sockets where space is limited. The hydro bearing aims to reduce noise during continuous operation. This cooler targets systems needing basic thermal management without tall heatsinks.

Four-Pin PWM Power Limit

The cooler uses a standard four-pin connector running at 12V and .7A. Speed control depends entirely on the motherboard PWM implementation; some headers may not spin the fan below a minimum duty cycle. The hydro bearing requires consistent voltage to maintain lubrication at low RPM. No RGB or LED circuitry is present on the unit.

Straightforward Clip Mount

Installation typically uses push-pin clips that snap into standard mounting holes around the socket. The square 70mm frame can interfere with tall RAM modules or VRM heatsinks on dense boards. Builders should verify clearance around the socket before ordering. The four-wire lead reaches most CPU fan headers without extension cables.

Privalumai

  • 70 mm fan fits tight CPU cooler spaces
  • Hydro bearing reduces friction for quieter long-term operation
  • 4-pin connector enables precise PWM speed control
  • 12 V .7 A rating keeps power draw low
  • 15 mm slim profile suits low-profile and small-form-factor builds

Specifikacijos

ModelDE07015R12U
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeHydro
Power Connector4 Pin
LEDNo

Klausimai apie šią prekę

Is the 70mm fan with hydro bearing the right 4-pin cooler for my build?

The 70x15mm size and 4-pin connector suit standard CPU headers; the hydro bearing and 12V 0.7A rating indicate a compact cooler for lower-power sockets.

What does the 0.7A current draw tell me about actual cooling performance?

At 12V the fan draws 0.7A, giving a modest airflow suited to small-form-factor or low-TDP processors rather than high-end desktop CPUs.

How does the 4-pin PWM connector control the fan in practice?

The 4-wire PWM header lets the motherboard vary speed precisely from idle to full load, so the 7015 fan runs only as fast as needed.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.