Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black square 50mm fan with 20mm depth and three-wire connector

OEM Industries

OEM Industries FAL3F12LHSA 50x20mm CPU cooler

SKU CH-RKN0-7GDKC

A 50 mm square fan with ball bearing and 3‑pin 12 V .27 A power for compact cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 50 mm square frame fits tight projector housings
  • Ball-bearing motor runs quietly for extended service life
  • 12 V 0.27 A draw keeps power demand low
  • Three-pin connector enables speed monitoring and control
  • Fan-only unit weighs little for vibration-sensitive mounts

Compact 50 mm square fan

The OEM Industries FAL3F12LHSA is a 50 by 20 mm DC fan built for tight spaces such as projectors or small-form-factor systems. It runs on 12 V and draws 0.27 A through a standard three-pin connector. Ball-bearing construction supports continuous operation in confined enclosures.

12 V 0.27 A three-pin power

The single specification that decides fit is the 12 V 0.27 A three-pin interface; the cooler will only work where that exact voltage, current and header are available. Systems using two-pin, four-pin or 5 V headers cannot power this unit without an adapter. Builders needing PWM control or a different voltage must select another model.

No LED or bundled accessories

The package contains the fan only, with no LED lighting, mounting brackets, screws or software. Installers must supply their own fixation hardware and any required adapters. The bare-fan approach keeps cost low but adds assembly steps for the end user.

Privalumai

  • Compact 50 mm square frame fits tight projector housings
  • Ball-bearing motor runs quietly for extended service life
  • 12 V 0.27 A draw keeps power demand low
  • Three-pin connector enables speed monitoring and control
  • Fan-only unit weighs little for vibration-sensitive mounts

Specifikacijos

ModelFAL3F12LHSA
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Klausimai apie šią prekę

What does the 0.27 A rating mean for a standard 12 V fan header?

At 12 V the fan draws 0.27 A, well within the typical 1 A limit of most motherboard headers.

What does the 3-pin connector provide compared with a 4-pin header?

The 3-pin plug supplies power and tachometer signal; speed is controlled by voltage rather than PWM.

Will the 50 mm by 20 mm frame fit my projector or small-form-factor build?

The square frame measures 50 mm on each side and is 20 mm thick, so verify your mounting holes and clearance against those dimensions.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.