Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 60mm square CPU cooling fan with 2-pin power connector

OEM Industries

OEM Industries FSY62S12H 60mm 12V 0.3A 2-Pin CPU Cooler

SKU CH-FFFQ-W8QNF MPN FSY62S12H

A 60 mm sleeve-bearing fan drawing 0.3 A at 12 V with a two-pin connector for CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Compact 60 mm frame fits tight chassis spaces
  • 12 V / 0.3 A draw keeps power use low
  • Sleeve bearing runs quietly at low speeds
  • Simple 2-pin connector plugs straight into motherboard
  • Fan-only design lets you pair any heatsink you need

Compact 60 mm CPU fan for tight builds

This 60 mm sleeve-bearing fan runs on 12 V at 0.3 A and connects with a standard 2-pin header. It is supplied as a fan-only unit in black, intended as a direct replacement or supplementary cooler for small-form-factor systems and legacy sockets. No LED lighting is included.

Suits repair jobs and space-constrained boards

Builders who need a low-profile, two-wire fan for a proprietary chassis or an older motherboard will find the connector and voltage match. It is not suited for high-TDP processors, overclocked workloads or any installation that demands PWM speed control or a larger heatsink assembly.

2-pin connector limits speed control

The 2-pin power connector delivers constant 12 V supply without a tachometer or PWM signal, so the fan runs at a fixed speed and cannot be regulated by the motherboard. Verify that your board accepts a 2-pin CPU fan header before fitting.

Privalumai

  • Compact 60 mm frame fits tight chassis spaces
  • 12 V / 0.3 A draw keeps power use low
  • Sleeve bearing runs quietly at low speeds
  • Simple 2-pin connector plugs straight into motherboard
  • Fan-only design lets you pair any heatsink you need

Specifikacijos

ModelFSY62S12H
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Klausimai apie šią prekę

Will the 60mm frame align with my motherboard's CPU mounting holes?

The 60mm square frame matches standard 60mm mounting patterns; verify your board's hole spacing before fitting.

How do I connect the 2-pin power lead without reversing polarity?

Align the keyed 2-pin connector with the motherboard header — red to 12V, black to ground — then press straight in until it clicks.

When should I replace the sleeve-bearing fan?

Replace the fan once bearing noise becomes audible or RPM drops noticeably; sleeve bearings typically wear faster than ball bearings.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.