Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 50mm square ball-bearing fan with 2-pin connector

OEM Industries

OEM Industries G5010M12D CS 50mm ball-bearing fan 2-pin

SKU CH-29ZS-1NXCN

A 50 mm ball-bearing fan with a 2-pin connector runs at 12 V and 0.20 A for compact cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • 50 mm square frame fits tight CPU cooler mounts
  • Ball-bearing motor reduces wear for longer service life
  • 12 V, 0.20 A draw keeps power load low
  • Two-pin connector plugs straight into standard headers
  • Black finish blends cleanly with dark builds

50 mm ball-bearing cooler fan

The OEM Industries G5010M12D CS is a 50 mm square DC cooler built around a ball-bearing fan. It draws 0.20 A at 12 V through a two-pin connector and has no LED lighting. The unit suits compact PC cases, humidifiers, inverters or similar equipment that need a small, reliable airflow source.

Sustained-load behaviour

Ball-bearing construction keeps friction low during continuous operation, so the fan maintains steady speed and airflow over long periods. The 12 V, 0.20 A rating means power draw stays predictable under constant load. Without PWM control the speed is fixed, so acoustic output and cooling capacity do not vary with temperature swings.

Pre-order checks

Verify that your device provides a two-pin 12 V header with the correct polarity for the 2-wire lead. Confirm the 50 mm square footprint fits the mounting holes and clearance of your chassis or appliance. Ensure the fixed-speed, non-PWM design matches the thermal profile you need, because the fan cannot be regulated by the host system.

Privalumai

  • 50 mm square frame fits tight CPU cooler mounts
  • Ball-bearing motor reduces wear for longer service life
  • 12 V, 0.20 A draw keeps power load low
  • Two-pin connector plugs straight into standard headers
  • Black finish blends cleanly with dark builds

Specifikacijos

ModelG5010M12D CS
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

Klausimai apie šią prekę

How much noise and heat does the 50 mm ball-bearing fan produce when running 24/7 at 12 V and 0.20 A?

At 12 V and 0.20 A the fan draws very little power, so it stays cool and quiet enough for continuous operation in a PC case or similar enclosure.

What power source and connector must I already have to run the 2-pin 12 V fan?

You need a 12 V DC supply with a 2-pin header or matching wires; the fan has only two leads and no PWM or extra connectors.

Will the 50 mm square cooler fit alongside the older 5010-size fans I want to keep in my build?

The G5010M12D CS uses the same 50 mm footprint as legacy 5010 fans, so it lines up with existing mounting holes and clears adjacent components the same way.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.